Model reference Documented regional identities

WORX
by the model.

Explore documented models by tool family. Match the actual regional identity and complete instructions before using any model-specific guidance.

Identify your tool

Circular saws

Explore the collection

Corded compact circular saw

WX429L

A rear-grip 115 mm corded saw with separate safety/trigger actions, rear depth lever and front bevel lever; the bounded guide retains original wood assembly and connected dust collection.

Model, manuals & limits

Cordless compact circular saw

WX531L

Qualify the actual document, original wood blade, listed existing power, single designated handle and active native extraction before a modest square sample.

Model, manuals & limits

More guides for this brand

WORX WX429L: a corded wood workflow with the correct grip, depth and extraction

Prepare the exact WX429L original 115 mm wood assembly, rear safety-switch/trigger grip, separate depth and bevel controls, required extraction and a supported square sample.

Explore the collection

WX429L or CR5435B-00: choose a complete compact wood-cutting system

Compare actual supply, original assemblies, native dust control and grip evidence before selecting an eligible supported wood-cutting workflow.

Explore the collection

WORX WX531L: an exact AR01474500 owner system and square wood sample

Match the actual 6900/min body, original WA5043 assembly, listed commissioned power and active extraction before a controlled square crosscut.

Explore the collection

Identify your tool

Oscillating multi-tools

Explore the collection

Corded oscillating multi-tool

WX686L

A stored wrench operates the flange, with different open-slot and closed-hole mounting routes and a cord that must remain clear of the cut.

Model, manuals & limits

Cordless oscillating multi-tool

WX697L

A battery-isolated owner workflow for the exact US body, with separate open-slot and closed-hole mounting and a visible wood-cut acceptance decision.

Model, manuals & limits

Cordless oscillating multi-tool

WX696L

An 18 V nominal / 20 V MAX body with removable onboard hex wrench, original flange and maintained slide switch. Qualify the actual listed commissioned power system and identified native wood blade.

Model, manuals & limits

More guides for this brand

WORX WX686L: use the removable wrench, then control the corded cut

Match the US 120 V body, install the actual wood blade through its correct flange route and complete a supported cut without borrowing Hyperlock controls.

Explore the collection

Worx WX697L: Hyperlock mounting and a fixed-angle wood cut

Qualify the existing US power system, distinguish open-slot and closed-hole mounting, and finish a visible supported wood cut with an isolated acceptance check.

Explore the collection

Worx WX686L versus WX697L: wrench, Hyperlock and a complete power route

Choose between a corded removable-wrench system and a commissioned cordless Hyperlock system without merging fasteners, interfaces or speed settings.

Explore the collection

Return a stored oscillating tool to use: identity, condition and full setup

Rebuild the exact accessory and supply record, inspect while isolated, complete the correct mounting route and choose ordinary use, missing-evidence hold or service.

Explore the collection

WX696L: remove the stored wrench, secure the flange and trim loose wood

Distinguish open-ended and closed-ring mounting, remove and store the working wrench, then complete a supported visible wood cut with battery-out acceptance.

Explore the collection

Identify your tool

Electric screwdrivers

Explore the collection

Compact cordless electric screwdriver

WX240L

The WX240L uses three torque selections for small fastening jobs. Its USB-C charging connection and integrated battery make charging practice part of the setup, rather than a reason to treat every USB supply as interchangeable.

Model, manuals & limits

Compact cordless electric screwdriver

WX252L

The extending shaft changes how far the WX252L can reach, not the direction in which a screw should be driven. Plan room for the grip and keep the bit aligned with the screw instead of using the extension as an angle joint.

Model, manuals & limits

Compact cordless electric screwdriver

WX255L

The WX255L combines a selectable bit cartridge with a removable screw holder. Keep those mechanisms separate: the cartridge selects the driving bit, while the holder steadies the fastener and needs room for its jaws.

Model, manuals & limits

More guides for this brand

A compact screwdriver will not charge: external checks

Check the specified charging arrangement, visible connector condition and indicators without opening the tool or experimenting with cells.

Explore the collection

The USB plug is not the complete charging specification

Keep the charging connector, supply requirements and battery design separate when choosing cables or sharing a charging space.

Explore the collection

Choose a first electric screwdriver for your actual jobs

Compare access, controls, bit retention and battery service using the jobs you actually expect to do.

Explore the collection

Clean a screwdriver after flatpack assembly

Remove ordinary exterior dust and sort accessories without washing, lubricating or opening the screwdriver.

Explore the collection

Seat a furniture screw without using the motor to hide a bad joint

Use visible joint conditions, cautious powered stages and a clear stop rule to distinguish a seated fitting from a stripped or misaligned screw.

Explore the collection

Integrated or removable battery: choose a small screwdriver around your charging routine

Compare integrated-battery drivers and removable M4 or Makita batteries without confusing connector shape, voltage labels or kit contents.

Explore the collection

A compact screwdriver will not start or stops mid-screw: what to check safely

Separate control lock, charging state, battery engagement and a resisting screw before deciding whether a compact driver needs service.

Explore the collection

Screw holder versus magnetic bit holder

Separate supporting a loose fastener from retaining the driving bit before choosing a compact driver for awkward furniture access.

Explore the collection

When external checks should end and service should begin

Recognize the point where external owner checks stop and a damaged or repeatedly failing tool needs professional attention.

Explore the collection

Secure small furniture parts before powered fastening

Restrain a furniture component before driving so that a screw holder or free hand does not become its only support.

Explore the collection

Choose a compact driver for a tight space by checking the screw axis

Compare extending reach, pivoting grips and short bodies using an unpowered access rehearsal rather than overall size alone.

Explore the collection

A small screwdriver becomes unusually hot

Respond to unusual warmth during fastening or charging without forcing a protection reset or hiding a heavy-load problem.

Explore the collection

Torque buttons or a numbered clutch ring?

Compare three torque selections with a numbered clutch ring using the same sample joint and a visible seating endpoint.

Explore the collection

WORX WX240L: assemble a small furniture fitting without crushing the finish

Prepare a supported furniture joint, choose a fitting bit and use the WX240L torque control without treating the highest setting as the default.

Explore the collection

WORX WX252L: reach a recessed screw without driving at an angle

Use the WX252L extending shaft to plan a straight approach to a visible recessed screw, with a dry access check before powered driving.

Explore the collection

WORX WX240L or WX252L for household access?

Compare torque selection with extended reach before choosing between two small WORX drivers.

Explore the collection

Select the right bit in the WORX WX255L cartridge

Choose and engage a WX255L cartridge bit without forcing the slide or treating the stored bit as automatically suitable.

Explore the collection

Use the WX255L screw holder without losing alignment

Use the WX255L removable screw holder to support a loose fastener while preserving a straight drive and room for the jaws.

Explore the collection

Identify your tool

Hot glue guns

Explore the collection

Compact hot glue gun

WX045L

The North American WX045L heats from a compatible Power Share battery and uses 11 mm sticks. Prepare a protected workpiece and a stable resting position first; cordless operation does not make overhead gluing or an upward-pointing nozzle appropriate.

Model, manuals & limits

More guides for this brand

Check fit before using hot glue as a gap filler

Dry-fit until the pieces meet without rocking or spring pressure; hot glue should retain a sound decorative fit, not disguise a gap.

Explore the collection

Stop safely when a glue gun will not heat

Stop immediately for damage, smoke or sparks; perform only the exact model’s normal external power, adhesive and readiness checks before qualified service.

Explore the collection

Decide whether a damp-area project needs another adhesive

Dry surfaces at assembly do not establish wet-use suitability; keep these bonds away from washing, condensation, wet tiles and shoe repairs.

Explore the collection

Know when hot glue is the wrong household repair

Use hot glue only for a light decorative attachment whose failure is inconsequential; reject structural, wet, electrical, food-contact and safety-critical repairs.

Explore the collection

Choose mini or full-size hot glue for the joint

Choose a mini or full-size system by access, controllable application and matched adhesive—not by assuming a wider stick makes a stronger joint.

Explore the collection

Hold paper and fabric safely while applying hot glue

Support paper and fabric on a heatproof silicone mat, test both faces and keep fingers away from any area where hot glue can penetrate.

Explore the collection

Diagnose a WX045L bond that comes apart after cooling

Use the cooled failure faces to distinguish poor contact timing, surface problems and an unsuitable hot-melt application.

Explore the collection

Clean and store WX045L without water or solvents

Cool and isolate the WX045L before external dry-cloth care, then store its battery away from loose metal.

Explore the collection

Diagnose hard trigger and backflow on WX045L

Separate warm-up and consumable checks from a blocked feed, and stop rather than forcing a WX045L that sends adhesive backward.

Explore the collection

Find your next answer.

Search guide titles, summaries, brands, and model names.

Tab to a result · Enter to open · Esc to close