An 18 V nominal / 20 V MAX body with removable onboard hex wrench, original flange and maintained slide switch. Qualify the actual listed commissioned power system and identified native wood blade.

Exact listed power

Use an already commissioned original system from manual page 7: packs WA3520/WA3525/WA3575/WA3578 and chargers WA3742/WA3875/WA3881, under complete actual instructions. No kit-capacity or platform-name substitution.

Removable wrench and flange

With battery removed and cooled accessory handled with gloves, remove the stored wrench, loosen the flange counterclockwise, follow the actual open-ended or closed-ring route, tighten clockwise and withdraw/re-store the wrench before power.

Slide switch and upward removal

Toward the head is ON and rearward is OFF. Verify OFF before insertion. To remove the pack, press its release and lift it upward; OFF alone is not isolation.

Frequency and low-power light

The manual gives 5,000–18,000 oscillations per minute and fixed 3.6 degrees, not rotary RPM or per-dial values. The worklight flashes when power is low; it is not a clamp test, runtime gauge or generic thermal code.

Check before you follow

Identity & documentation.

Brand
WORX
Model
WX696L
Tool type
Cordless oscillating multi-tool
Market
United States, exact WX696L body
Catalog number
WX696L
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Document-based existing-owner scope, not hands-on testing or a current kit promise.
  • No Hyperlock, arbitrary Universal Fit approval, named charging recipe or installed hidden-service trimming.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

WORX: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • WX696L wrench and wood sample

    Distinguish open-ended and closed-ring mounting, remove and store the working wrench, then complete a supported visible wood cut with battery-out acceptance.