The North American WX045L heats from a compatible Power Share battery and uses 11 mm sticks. Prepare a protected workpiece and a stable resting position first; cordless operation does not make overhead gluing or an upward-pointing nozzle appropriate.
Wait for the ready light
Start heating with the specified switch action and wait for the red indicator to become green before feeding adhesive.
Keep hands out of the glue path
Support the work on a suitable protective pad, especially with permeable materials. Keep hands away from where hot glue could pass through.
Stop and isolate for care
Switch off, allow safe cooling and remove the battery before maintenance. Dry-cloth exterior cleaning does not include opening the tool or clearing its interior.
Check before you follow
Identity & documentation.
- Brand
- Worx
- Model
- WX045L
- Tool type
- Compact hot glue gun
- Market
- North America support identity; not WX045 European body
- Catalog number
- WX045L
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- No overhead gluing or upward-pointing nozzle; never lay the hot tool on its side.
- Abnormal smoke or sparking requires stopping and service, not continued use.
- For the WX045L, keep the adhesive within the exact recommended system; unclear troubleshooting wording is not a reason to substitute a different melting range.
- Shoe soles, wet-room tiles and structural repairs require a suitable specialist bonding method.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
WORX: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- WX045L hard trigger or backflow
Separate warm-up and consumable checks from a blocked feed, and stop rather than forcing a WX045L that sends adhesive backward.
- Why a WX045L bond releases
Use the cooled failure faces to distinguish poor contact timing, surface problems and an unsuitable hot-melt application.
- WX045L dry cleaning and storage
Cool and isolate the WX045L before external dry-cloth care, then store its battery away from loose metal.
- Choose mini or full-size hot glue for the joint
Choose a mini or full-size system by access, controllable application and matched adhesive—not by assuming a wider stick makes a stronger joint.
- Know when hot glue is the wrong household repair
Use hot glue only for a light decorative attachment whose failure is inconsequential; reject structural, wet, electrical, food-contact and safety-critical repairs.
- Hold paper and fabric safely while applying hot glue
Support paper and fabric on a heatproof silicone mat, test both faces and keep fingers away from any area where hot glue can penetrate.
- Decide whether a damp-area project needs another adhesive
Dry surfaces at assembly do not establish wet-use suitability; keep these bonds away from washing, condensation, wet tiles and shoe repairs.
- Check fit before using hot glue as a gap filler
Dry-fit until the pieces meet without rocking or spring pressure; hot glue should retain a sound decorative fit, not disguise a gap.
- Stop safely when a glue gun will not heat
Stop immediately for damage, smoke or sparks; perform only the exact model’s normal external power, adhesive and readiness checks before qualified service.