A battery-isolated owner workflow for the exact US body, with separate open-slot and closed-hole mounting and a visible wood-cut acceptance decision.
Fixed angle, variable frequency
The exact WX697L has a fixed 4° angle and 8,000–18,000 OPM dial range. It has no two-angle selector; 20 V maximum is 18 V nominal, not cross-platform permission.
Isolated Hyperlock installation
Remove the battery. Lift and turn the lever to release, seat the approved accessory, turn to clamp and fold fully home. A closed-hole accessory requires removal and refitting of the matched flange/shaft assembly.
Qualified existing power system
Use an already commissioned manufacturer-approved actual combination from the tool’s listed battery and charger scope, with its own instructions. The tool table alone is not a charging tutorial.
Controlled cutting and low-charge indication
Start before contact and cut with light constant movement, not side levering. A flashing work light indicates low charge, not a comprehensive fault diagnosis or proof of battery health.
Check before you follow
Identity & documentation.
- Brand
- Worx
- Model
- WX697L
- Tool type
- Cordless oscillating multi-tool
- Market
- United States
- Catalog number
- WX697L
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- No two-angle selector, arbitrary power pairing, blanket accessory compatibility or current kit promise.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
WORX: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- WX697L fixed-angle owner project
Qualify the existing US power system, distinguish open-slot and closed-hole mounting, and finish a visible supported wood cut with an isolated acceptance check.
- WX686L versus WX697L: two different mounting workflows
Choose between a corded removable-wrench system and a commissioned cordless Hyperlock system without merging fasteners, interfaces or speed settings.