A stored wrench operates the flange, with different open-slot and closed-hole mounting routes and a cord that must remain clear of the cut.
Exact 120 V corded body
Match the actual US WX686L nameplate: 120 V AC, 60 Hz, 2.5 A, Class II. Keep the cord outside the whole cutting envelope; unplug for setup.
Removable wrench and flange
With the plug out, take the wrench from top storage, loosen the flange and seat the accessory. Tighten with the wrench, lift it out and return it to storage.
Open-slot versus closed-hole
The illustrated open-slot accessory enters under the loosened flange. A closed-hole accessory requires fastener removal and reinstallation; do not force or modify the interface.
Frequency without a borrowed recipe
The manual groups sawing at high frequency within 11,000–20,000 OPM. It gives no numbered dial mapping or numerical plunge-start setting.
Check before you follow
Identity & documentation.
- Brand
- WORX
- Model
- WX686L
- Tool type
- Corded oscillating multi-tool
- Market
- United States / 120 V AC exact owner body
- Catalog number
- WX686L
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- No Hyperlock, tool-free jaws, current kit guarantee or universal accessory inference.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
WORX: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- WX686L wrench-and-flange project
Match the US 120 V body, install the actual wood blade through its correct flange route and complete a supported cut without borrowing Hyperlock controls.
- WX686L versus WX697L: two different mounting workflows
Choose between a corded removable-wrench system and a commissioned cordless Hyperlock system without merging fasteners, interfaces or speed settings.
- Stored tool: qualify the whole system before power
Rebuild the exact accessory and supply record, inspect while isolated, complete the correct mounting route and choose ordinary use, missing-evidence hold or service.