Model reference United States
Read the selected drill and sander references by tool family. Model, market, package and manual limits are preserved separately.
Identify your tool
Trigger activation has about 10 seconds of after-glow. DL6293B-00 and HD6294B-00 add a separate button with about 10 minutes of inactivity timeout; the button is disabled while running.
Trigger only
Trigger plus separate button
Trigger plus separate button
Trigger activation has about 10 seconds of after-glow. DL6293B-00 and HD6294B-00 add a separate button with about 10 minutes of inactivity timeout; the button is disabled while running.
Original Toolibo comparison diagram. Generic symbols; no manufacturer photographs or service artwork.
Cordless drill/driver
SKIL’s DL6293B-00 is the tool identity used by the compact drill’s manual and parts sheet. DL6293B-10 and DL6293B-1C are kit configurations. It has two speeds, 17 clutch settings plus drill mode, and a worklight with a separate button. The manufacturer’s partial parts diagram identifies body 0710039001 and Version A; it is not a full internal assembly drawing.
Model, manuals & limitsCordless drill/driver
The tool-only model is DL529301, while SKIL’s current family product page is the DL529302 kit. Its official download is a ZIP whose tool manual cover explicitly says DL529301. This two-speed brushless drill uses a 1/2-inch metal keyless chuck and 17 clutch positions plus drill mode. No torque rating is filled in here because one was not verified in the chosen official product and manual sources.
Model, manuals & limitsCordless hammer drill/driver
HD6294B-00 is SKIL’s compact hammer-drill tool identity. Its manual separates screwdriving, drilling and hammer drilling, and lists 17 clutch positions. The indexed parts document has a kit-style filename but its illustrated header explicitly identifies HD6294B-00, body 0730069001, Version A. Its 27,000-per-minute upper impact rate comes from the manual, avoiding the malformed number on the product page.
Model, manuals & limitsRead the comparison
For rotary work, compare access, lighting and full kit cost. Consider HD hammer mode only for suitable masonry; do not rank unknown weight conditions or unsupported capacities.
Explore the differencesChoose a specific model, control or documentation question.
Use gear 1 and a numbered clutch setting for the DL529301 screw trial. On the QC536001, flashing green means charging; red is not a normal charging indication.
WORKLIGHT can switch the light on and off while the tool is stopped. Trigger activation times out after about 10 idle seconds; button activation after about 10 idle minutes. The button is disabled while running.
For cabinets, consider DL6293B’s independent light and actual dimensions. Price the bare tool and missing items if you already own compatible equipment; a tiny speed difference is not an efficiency ranking.
For assembly, check DL6293B’s access first. HD6294B’s extra mode matters only when the material, bit and installation requirements permit hammer drilling.
Match the exact configuration and page field, separate manual-supported operation from unresolved delivery contents, and do not assume the largest number is right.
Do not hammer wood, metal, ceramic or plastic. Drilling and hammer functions lock the clutch, so a low number does not limit every reaction. The 13 mm chuck specification is not masonry-hole capacity.
Identify the tool externally, then record package, document cover, Body Number, Version and date together. A parts drawing is not disassembly permission.
Record all three exact models and verify both connections. A newer model absent from an old list needs confirmation, not forced fitting or a permanent incompatibility assumption.
Identify your tool
Conceptual top view, not actual dimensions or a minimum-clearance template. A circle leaves an inside-corner area; a detail point reaches closer, but housing, hand and canister may stop travel first. Check the complete route unplugged.
Do not tilt the round edge into the corner. SR211601 remains unplugged until its applicable stopping sequence is clarified.
Keep the pad flat and supported; change method where body clearance prevents a controlled outward and return stroke.
Conceptual top view, not actual dimensions or a minimum-clearance template. A circle leaves an inside-corner area; a detail point reaches closer, but housing, hand and canister may stop travel first. Check the complete route unplugged.
Original Toolibo comparison cards and generic vector symbols; no product photograph or traced OEM drawing.
Corded random-orbit sander
A variable-speed round-pad sander with exact US owner instructions and a visible product/manual pad-size discrepancy.
Model, manuals & limitsCorded detail sander
A pointed-pad detail sander whose paper fit must be confirmed against conflicting published dimensions.
Model, manuals & limitsRead the comparison
Consider SR211601 for broad surfaces and variable speed, SR250801 for accessible corner detail. Until SR211601 stopping instructions are clarified for the actual tool, assess it unplugged and do not trial-sand.
Explore the differencesChoose a specific model, control or documentation question.
Choose contact geometry before power or brand. Some corners are better finished by hand than by buying another machine.
Check material, machine, abrasive, collection and workholding before a controlled sample; an unloaded run is not a substitute.
Use two comparable sample areas and change one factor at a time instead of blaming every poor result on speed.
Use a defined bare-oak and water-based stain example to plan 120 to 150, with checks for continuing, advancing or returning a stage.
Choose DCW210, DWE6423, SR250801 or SR211601 collection, then follow a complete DWE6423 original-bag example.
Fit an eight-hole hook-and-loop disc to a DCW210 or DWE6423, check the edges and troubleshoot lifting paper or poor extraction.
First distinguish a missed connection from a shutdown accompanied by electrical damage. The external problems you can correct are limited; repeated starting does not clarify an unknown fault.
Check 5-inch paper, holes and retention, and understand dial 1–6. Do not run a powered trial until the applicable stopping procedure is clarified.
Fit, inspect, empty and refit the supplied canister while distinguishing the tool connection from the housing/filter joint and diagnosing loose fit or falling collection.
An unplugged fit check for the pointed pad, housing, dust canister and return path before choosing powered or hand sanding.
Conflicting size descriptions are a poor basis for buying parts. Use the explicit CDA9004 paper compatibility and identify a replacement backing pad separately.
A hose advertised as 1¼ inches may not fit your actual connection. Identify which end inserts, which surrounds it and how it stays attached before deciding what the purchase still needs.
Compare ROS20VS and PCL406 normal sequences, rehearse without power and keep unresolved model instructions separate.
Arrange support and restraints for a flat panel or narrow strip, then rehearse the whole tool and collector path with power disconnected.
A stopped, cleaned inspection uses three scratch examples to decide whether to continue, investigate contamination or advance, including paper, pad and edge checks.
Read the exact current row and total-length column. A higher AWG number means a thinner conductor, not greater capacity.
Rehearse the full disconnected stroke to find pulling, clamp snags and loops falling under the pad before sanding.
A fitting connector is only one part of the system. This DWE6423 and DWV010 example identifies the hose, filters and bag as well as the material boundary.
Clear dust, change the light and viewing direction, then distinguish remaining coarse scratches from new isolated marks.
Follow a reclaimed shelf across faces, edges, joints and bracket backs, then separate removable fittings from unresolved hardware.
The reading behind this guide
Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.
Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.
Checked · Pages Current default selected variant41428363542613 isDL6293B-10: toolDL6293B-00,BY5197022Ah,QC536001,clip,bit,batteryjacket. PublishedToolWeight1.92lb has unspecifiedbatterycondition.
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
Checked · Pages FullPDF read. Printed10specs500/1800rpm17+D;11fivebatteries/fourchargers;14lightingtrigger10seconds versusbutton10minutes,buttondisabledrunning.
Document checked
Checked · Pages CurrentDL529302 package:2AhPWRASSIST,PWRJUMP,clip,PH2. Specs480/1800rpm,17+D,explicitweightwithoutbattery2.23lb; lowerHIGH/LOWSPEEDpanel1450rpm remainsconflict.
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
Checked · Pages FullofficialZIP downloadedandall3PDFsextracted:2019-0131_DL529301...tool,2019-0201_BY519702...battery,2019-0308_QC536001...charger. Toolprinted10spec480/180017+D;11fivebatteries/twochargers;14triggerlight10seconds,noindependentbutton.
Document checked
Checked · Pages SelectedHD6294B-00 bare includesonlytool,clip,bit; no packcharger. ToolWeight2.03lb unspecifiedbatterycondition. Impactrate literal0-7,500/0-2,7000IPM; not silentlycorrected.
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
Checked · Pages FullPDFread. Printed10specs500/1800rpm7500/27000IPM17+D+H;11fivebatteries/fourchargers;lightingseparatebutton. No masonrymaxcapacity inferredfrom13mmchuck. Hammernotforwood,metal,ceramic,plastic.
Document checked
Checked · Pages Firstpage visually checked:DL6293B-00,Body0710039001,VersionA,2022/01/28. Secondpageonlycollet3860206001andhook2825653001.
Document checked
Match tool label and service applicability. Diagram is not owner-repair authorization. Only a partial chuck/clip service view, not a full exploded mechanism.
Checked · Pages FirstpageDL529301,Body0710012001,VersionA,2019/06/01. Listcollet3860163001,hook2826568001; notcompleteinternalrepairguide.
Document checked
Match tool label and service applicability. Diagram is not owner-repair authorization. Only a partial chuck/clip service view, not a full exploded mechanism.
Checked · Pages Firstpage visuallychecked:HD6294B-00,Body0730069001,VersionA,2022/01/28. Same2listedcollet/hooknumbersnotcompleteinternalinterchange.
Document checked
Match tool label and service applicability. Diagram is not owner-repair authorization. Only a partial chuck/clip service view, not a full exploded mechanism.
Checked
Lookup record only
Checked
Document checked
US-market reference; verify the exact tool and document applicability. No independent performance testing.
Revision 04/19 · Checked · Pages English printed pages 5 and 10–15; revision at page 16; 48 PDF pages.
Document checked
US-market reference; verify the exact tool and document applicability. No independent performance testing.
Revision 2026 catalog; no separate revision code asserted. · Checked · Pages Printed page 102, also PDF page 102.
Document checked
US-market reference; verify the exact tool and document applicability. No independent performance testing.
Checked
Document checked
US-market reference; verify the exact tool and document applicability. No independent performance testing.
Revision 04/19 · Checked · Pages English printed pages 5 and 10–15; revision at page 16; 48 PDF pages.
Document checked
US-market reference; verify the exact tool and document applicability. No independent performance testing.
Checked · Pages Full PDF downloaded from current official site footer; PDF/printed26 and27 rendered and visually checked. DL6293B154×67.3×198.5mm;HD6294B166×67.3×198.5mm; paired metric difference12mm, not re-converted roundedinches. Page26 DL6293B-1C includes100W charger, retaining unresolved current webpage45W description. Page27HD-10 kit2AhPWRASSIST/AutoPWRJUMP/clip/bit/jacket. Page26DL6300D dual12/20V is model-specific.
Document checked