SKIL’s DL6293B-00 is the tool identity used by the compact drill’s manual and parts sheet. DL6293B-10 and DL6293B-1C are kit configurations. It has two speeds, 17 clutch settings plus drill mode, and a worklight with a separate button. The manufacturer’s partial parts diagram identifies body 0710039001 and Version A; it is not a full internal assembly drawing.

Battery platform

SKIL PWR CORE 20

Controls and model distinctions

Compact-generation drill with separate worklight button; 450 in-lb manufacturer-listed maximum torque, with 500/1800 RPM no-load gear limits; Same PWR CORE 20 platform as the other SKIL selections.

Package identity

DL6293B-10: DL6293B-00 drill; 2.0Ah PWR ASSIST battery; Charger. Exact kit identity from official support index and product variant; verify charger model at purchase.

Package identity

DL6293B-1C: DL6293B-00 drill; 2.0Ah USB-C battery; USB-C charger and cable; Belt clip; Screwdriving bit. Official page conflicts on charger output: 45W description vs 100W in contents; no single charger wattage is confirmed here.

Document applicability

No printed revision identifier has been verified for this document.

Check before you follow

Identity & documentation.

Brand
SKIL
Model
DL6293B-00
Tool type
Cordless drill/driver
Market
United States
Catalog number
DL6293B-00
US product listing
DL6293B-10
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Manuals & service references

Identify the right document.

These are document reference records, not downloadable manuals. Original manufacturer files are not provided here. Match the exact model and revision before use. A parts reference does not authorize internal repair.

Operator manualPDF

Operator manual

Model identified in this document

No printed revision identifier has been verified for this document.

Original document languages: English, French, Spanish

Document checked

Parts referencePDF

Parts reference

Model identified in this document

partial chuck and belt-clip assembly view

Match tool label and service applicability. Diagram is not owner-repair authorization. Only a partial chuck/clip service view, not a full exploded mechanism.

Document checked

Keep the limits in view.

  • Documentation-based introduction; no hands-on review, durability score, or comparative test.
  • Battery voltage branding does not establish cross-brand compatibility.
  • Do not apply another model’s hammer instructions or parts.
  • DL6293B-1C charger wattage is unresolved: page states both 45W and 100W.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Keep reading

SKIL: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • Choose three SKIL drills

    For rotary work, compare access, lighting and full kit cost. Consider HD hammer mode only for suitable masonry; do not rank unknown weight conditions or unsupported capacities.

  • DL6293B compact setup

    WORKLIGHT can switch the light on and off while the tool is stopped. Trigger activation times out after about 10 idle seconds; button activation after about 10 idle minutes. The button is disabled while running.

  • DL6293B or DL529301

    For cabinets, consider DL6293B’s independent light and actual dimensions. Price the bare tool and missing items if you already own compatible equipment; a tiny speed difference is not an efficiency ranking.

  • DL6293B or HD6294B

    For assembly, check DL6293B’s access first. HD6294B’s extra mode matters only when the material, bit and installation requirements permit hammer drilling.

  • Handle SKIL specification conflicts

    Match the exact configuration and page field, separate manual-supported operation from unresolved delivery contents, and do not assume the largest number is right.

  • SKIL model and kit suffixes

    Identify the tool externally, then record package, document cover, Body Number, Version and date together. A parts drawing is not disassembly permission.

  • SKIL battery compatibility

    Record all three exact models and verify both connections. A newer model absent from an old list needs confirmation, not forced fitting or a permanent incompatibility assumption.

The reading behind this guide

Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.

Sources & references.

Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.

  1. SKIL: Manufacturer reference

    Checked · Pages Current default selected variant41428363542613 isDL6293B-10: toolDL6293B-00,BY5197022Ah,QC536001,clip,bit,batteryjacket. PublishedToolWeight1.92lb has unspecifiedbatterycondition.

    Document checked

    Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.

  2. SKIL: Operator manual

    Checked · Pages FullPDF read. Printed10specs500/1800rpm17+D;11fivebatteries/fourchargers;14lightingtrigger10seconds versusbutton10minutes,buttondisabledrunning.

    Document checked

  3. SKIL: Parts reference

    Checked · Pages Firstpage visually checked:DL6293B-00,Body0710039001,VersionA,2022/01/28. Secondpageonlycollet3860206001andhook2825653001.

    Document checked

    Match tool label and service applicability. Diagram is not owner-repair authorization. Only a partial chuck/clip service view, not a full exploded mechanism.

  4. SKIL: Official support lookup

    Checked

    Lookup record only