GluePen pairs a slim cordless body with 7 mm adhesive sticks. Prepare and dry-fit a small compatible craft joint first, then wait for the ready indication and keep both the nozzle and fresh adhesive away from hands.
Readiness before pressure
Wait for the flashing green heating light to become steady before applying moderate feed pressure.
Adhesive and substrate
Use the recommended 7 mm adhesive suited to the material. This manual excludes PE, PP, PTFE, Styrofoam and plasticized PVC.
Charging is a separate task
Do not use the tool while charging. Follow the specified power-supply instructions and allow the nozzle to cool before storage.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- GluePen
- Tool type
- Compact hot glue gun
- Market
- Germany
- Catalog number
- 06032A2000
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- This manual excludes PE, PP, PTFE, Styrofoam and plasticized PVC; do not transfer another adhesive's compatibility claims.
- Do not use while charging, and use only the specified or recommended power supply.
- These bonds are moisture-sensitive: wet-room tile and shoe-sole repairs are outside this guide.
- The silicone nozzle cap can remain hot. No internal repairs or battery removal.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- GluePen cork insert
Fit a lightweight cork lining with a dry trial, supported glue application and a cool-joint check before adding desk items.
- Match stick and temperature
Use the gun identity, the adhesive label and the intended material together; a stick that fits the opening is not automatically the right one.
- Bench setup and cooldown
Separate the hot-tool zone, the workpiece and the finished-item area so a pause or shutdown does not create an unexpected contact hazard.
- Make a useful scrap bond trial
Check the actual surfaces, joint shape and cooled result so a quick craft test answers a real question instead of giving false reassurance.
- Threads, drips and feed faults
Use a short supported trial to distinguish continued feeding, adhesive mismatch and abnormal leakage without forcing or opening the glue gun.
- Battery pen or corded gun?
Compare reach, working rhythm, adhesive choice and storage needs without mistaking a cordless label for battery heating or a power ranking.
- GluePen charging and readiness
Read the same GluePen LED in its charging or operating context, without mistaking a connected cable for a working pen.
- GluePen will not feed
Check the GluePen stick, charge and heating state before treating poor flow as a blocked nozzle.
- Choose mini or full-size hot glue for the joint
Choose a mini or full-size system by access, controllable application and matched adhesive—not by assuming a wider stick makes a stronger joint.
- Know when hot glue is the wrong household repair
Use hot glue only for a light decorative attachment whose failure is inconsequential; reject structural, wet, electrical, food-contact and safety-critical repairs.
- Identify a plastic before choosing hot glue
Identify the actual polymer and finish, then match gun, adhesive and temperature; a separate formula claim never overrides a tool exclusion.
- Hold paper and fabric safely while applying hot glue
Support paper and fabric on a heatproof silicone mat, test both faces and keep fingers away from any area where hot glue can penetrate.
- Decide whether a damp-area project needs another adhesive
Dry surfaces at assembly do not establish wet-use suitability; keep these bonds away from washing, condensation, wet tiles and shoe repairs.
- Decide whether to rework an old decorative glue joint
Inspect the cold failure first; remove only accessible residue gently with a blunt object and stop if the finish or fit cannot be preserved.
- Plan alignment before a hot-glue joint sets
Establish visible cold alignment references, rehearse the tool-to-stand movement and place each decoration promptly without sliding through partly set glue.
- Compare battery, heating-base and residual-heat glue tools
GluePen heats from an integrated battery, Dremel 940 uses stored heat after cord removal, and P306 heats only in its battery-powered base.