Use a fixed rear reference for a clear wall-to-wall record.
Fixed rear reference
The GLM 40 manual specifies the rear edge as the measurement reference.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- GLM 40
- Tool type
- Laser distance meter
- Market
- Great Britain
- Catalog number
- 0601072900
- Manual revision used
- 10.04.2024
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- No hands-on accuracy, durability or speed testing is claimed.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- Use the Bosch GLM 40 rear reference for a room survey
Keep the rear edge on the intended starting surface and record skirting clearance separately from the wall span.
- Choose between Bosch GLM 40 and GLM 50-27 C by the measuring workflow
Compare fixed versus selectable starting references separately from the usefulness of a verified connected recording workflow.
- Make a first room survey that someone else can understand
State the survey purpose, name every span and keep measured, derived and unresolved dimensions visibly distinct.
- Diagnose a laser measurement reference error without guessing an offset
Align physical contact, selected reference and target geometry before interpreting a discrepancy or correcting old measurements.
- Curtain rail planning
Separate opening width, available wall space, finished hardware length and fabric dimensions before ordering.
- Picture row spacing
Choose equal edge gaps or equal centre spacing deliberately, and keep frame positions separate from fixing points.
- Skirting cut lists
List uninterrupted runs and their corner details. A perimeter total does not show how stock lengths can be cut.
- Unit conversion and rounding
Keep the original unit and quantity type. Convert areas with squared factors and round the purchase separately.
- Short-gap measuring methods
Check minimum range and physical access. Use a suitable direct method when the laser cannot define both endpoints.
- Temperature and battery checks
Record the exact symptom, restore permitted conditions normally and follow model-specific battery instructions.
- Checks after a drop
Repeated matching readings are not proof of accuracy. Follow the maker’s checking procedure and retake critical project dimensions.
- Appliance space planning
Compare the exact appliance’s body, operating envelope and delivery needs with independently measured available space.