Existing owners of the retired Dremel 930 need to match the adhesive family to its low or high setting. A 7 mm stick fitting the feed path does not by itself make the temperature suitable for a delicate craft material.
Retired product: educational coverage for existing owners, not a current availability claim.
Two settings, different adhesives
The low setting is 105°C and the high setting is 165°C. Use GG02, GG04 and GG05 in low mode, and GG01 and GG03 in high mode, as specified for the 930.
A plugged-in tool remains hot
The 930 heats while connected. Use its stand during pauses, unplug to stop heating and let it cool fully before storage.
Existing-owner scope
The 930 is listed as retired, so these instructions serve existing owners rather than promise current stock. Do not use the 940 nozzle-changing procedure on the 930.
Check before you follow
Identity & documentation.
- Brand
- Dremel
- Model
- 930
- Tool type
- Compact hot glue gun
- Market
- European/general English listing; retired model existing-owner scope
- Catalog number
- F0130930JA
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Retired model: guidance for existing owners, not a current purchase or stock recommendation.
- Use colour and glitter sticks only in their permitted low-temperature mode; do not feed liquid or paste adhesive.
- The 940 nozzle-change instructions do not apply to the 930.
- Keep this household workflow indoors and outside the housing; no user-serviceable internal repairs.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Dremel: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- Dremel 930 paper decoration
Match the 930 low setting to the right adhesive, test strike-through on scrap, and keep the paper supported while the decoration cools.
- Match stick and temperature
Use the gun identity, the adhesive label and the intended material together; a stick that fits the opening is not automatically the right one.
- Bench setup and cooldown
Separate the hot-tool zone, the workpiece and the finished-item area so a pause or shutdown does not create an unexpected contact hazard.
- Make a useful scrap bond trial
Check the actual surfaces, joint shape and cooled result so a quick craft test answers a real question instead of giving false reassurance.
- Threads, drips and feed faults
Use a short supported trial to distinguish continued feeding, adhesive mismatch and abnormal leakage without forcing or opening the glue gun.
- Battery pen or corded gun?
Compare reach, working rhythm, adhesive choice and storage needs without mistaking a cordless label for battery heating or a power ranking.
- Dremel 930 adhesive sessions
Sort low- and high-temperature adhesive tasks before starting a 930 session, and avoid treating its selector as a shortcut for unknown leftover glue.
- Dremel 930 glitter lettering
Use identified existing GG04 low-temperature stock to make short raised strokes, with a supported practice card before the final lettering.
- Stop safely when a glue gun will not heat
Stop immediately for damage, smoke or sparks; perform only the exact model’s normal external power, adhesive and readiness checks before qualified service.
- Make a small decorative wood joint with Dremel 930 and GG03
Use identified GG03 wood sticks with Dremel 930’s 165 °C high mode for a light decorative wood attachment, never a structural furniture repair.
- Attach a ribbon decoration to a gift box
Test actual ribbon and card with a compatible 930 low-temperature adhesive, then make minimal supported attachments away from food and child-use purposes.