The SD561201 starts through its forward/reverse collar and retains a suitable bit with a cinch-lock sleeve. Its powered softwood application is limited to the specified self-tapping screws up to ST3.5; a furniture screw is not automatically within that scope.

Keep household coverage to non-electrical furniture and accessible fittings.

Do not compare SD561201 battery capacity across different manual revisions; match the actual tool and its supplied instructions.

Internal service belongs to an authorized service center.

Collar control

The forward/reverse collar also starts the motor; release it to stop. Keep it untouched while changing bits.

Cinch-lock bit retention

Pull the sleeve, seat the correct quarter-inch hex bit, release and verify retention.

Sensor boundary

Circuit Sensor is not permission for live electrical work. Never insert the bit into an outlet or touch potentially energized circuitry.

Powered fastening boundary

Printed page 16 limits the powered softwood application to self-tapping screws no larger than ST3.5. Check the screw and material against that table before powering the collar.

Check before you follow

Identity & documentation.

Brand
SKIL
Model
SD561201
Tool type
Compact cordless electric screwdriver
Market
United States
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Documentation-based, not hands-on testing.
  • No live electrical, structural or internal repair instructions.
  • Keep household coverage to non-electrical furniture and accessible fittings.
  • Do not compare SD561201 battery capacity across different manual revisions; match the actual tool and its supplied instructions.
  • Internal service belongs to an authorized service center.
  • Powered softwood use is limited to self-tapping screws no larger than ST3.5. Screws outside the model’s application table use its specified nonpowered method; this does not establish particleboard suitability.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

SKIL: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • SKIL collar-controlled driving

    Fit a bit securely, distinguish the motor-starting collar from the bit-retention sleeve and keep SD561201 work separate from electrical tasks.

  • Check bit fit before power

    Separate screw-recess fit from tool-holder fit so a compact electric screwdriver starts with secure engagement rather than a slipping tip.

  • Tight-space driver access

    Compare extending reach, pivoting grips and short bodies using an unpowered access rehearsal rather than overall size alone.

  • Choose the charging arrangement

    Compare integrated-battery drivers and removable M4 or Makita batteries without confusing connector shape, voltage labels or kit contents.

  • No-start and stall checks

    Separate control lock, charging state, battery engagement and a resisting screw before deciding whether a compact driver needs service.

  • A control that will not stop

    Recognize an unreliable trigger or collar as a stop-use fault, not a grip problem to work around.

  • SKIL sensor safety boundary

    Keep the SD561201 Circuit Sensor separate from permission to open or repair electrical equipment.

  • SKIL collar versus pivot

    Compare the SD561201 collar and retained bit with the SD561802 trigger, pivot grip and magnetic holder.