FX1151 is FLEX’s two-speed drill/driver with 22 clutch settings and a separate drilling position. FLEX lists its tool-only configuration as FX1151-Z and the two-battery kit as FX1151-2A. The manual is shared with FX1251, which has hammer features that FX1151 does not. The Version A parts sheet identifies body 0710020001.
Battery platform
FLEX 24V
Controls and model distinctions
Larger than FX1131, with a higher listed no-load high gear of 2200 RPM; 750 in-lb manufacturer maximum torque; product page also calls this Peak Torque; No hammer mode or Turbo mode.
Package identity
FX1151-2A: FX1151 drill; Two 2.5Ah batteries; 160W charger; Bit holder; Belt clip; Bag.
Document applicability
No printed revision identifier has been verified for this document.
Check before you follow
Identity & documentation.
- Brand
- FLEX
- Model
- FX1151
- Tool type
- Cordless drill/driver
- Market
- United States
- Catalog number
- FX1151-Z
- US product listing
- FX1151-2A
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Manuals & service references
Identify the right document.
These are document reference records, not downloadable manuals. Original manufacturer files are not provided here. Match the exact model and revision before use. A parts reference does not authorize internal repair.
Operator manualPDF
Operator manual
Model identified in this document
No printed revision identifier has been verified for this document.
Original document languages: English, French, Spanish
Document checked
Parts referencePDF
Parts reference
Model identified in this document
fuller exploded component view
Match tool label and service applicability. Diagram is not owner-repair authorization. Use the manufacturer/service provider for internal repair.
Document checked
Keep the limits in view.
- Documentation-based introduction; no hands-on review, durability score, or comparative test.
- Battery voltage branding does not establish cross-brand compatibility.
- Do not apply another model’s hammer instructions or parts.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
FLEX: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- Compact, general or Turbo hammer?
Check FX1131 for restricted access, compare FX1151 for ordinary repeated work with two batteries, and choose FX1271T only after establishing a suitable hammer-drilling task.
- FLEX pack and charger checks
Start with the known FX1131 → FX0111 → FX0411 combination, then verify charger input. Voltage, Ah and watts do not replace model numbers.
- FX1131 or FX1151
Favor the shorter FX1131 for restricted access; compare the FX1151-2A kit when buying into the platform and needing a spare battery.
- FX1151 gear and clutch
The top selector chooses the mechanical range, the trigger varies speed within it, and the collar selects clutch or drilling. Stop and disconnect before adjustments.
- FX1151 or FX1271T
For ordinary assembly, compare the FX1151 first. Consider the FX1271T when an identified masonry job actually calls for its hammer action.
- FLEX manuals and service
Read the tool model first, then the cover and the parts sheet’s Body Number, Version and Issue Date. A kit suffix cannot replace those fields.
- FLEX kit contents
-1H provides one 6Ah Stacked Lithium pack and 280W charger; the older -2B provides one 2.5Ah plus one 5Ah and 160W. Check the full suffix first.
The reading behind this guide
Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.
Sources & references.
Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Operator manual
Checked · Pages 9: model/control drawing and specifications; model-specific operating sections follow.
Document checked
Full official /1415 manual internal conflict: printed p9 specifies22+drill; p14 FX1151 text specifies23torque settings and1–23. Do not infer a uniquely confirmed extra-position count; match actualring and applicableversion.
- FLEX: Parts reference
Checked · Pages PDF page 1 visually checked: Body 0710020001, Version A, Issue Date 2021/07/15; full current PDF downloaded. Search indexing may retain an older date.
Document checked
Match tool label and service applicability. Diagram is not owner-repair authorization. Use the manufacturer/service provider for internal repair.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.