Identify the exact body, abrasive interface and checked manual before following a procedure.

PCL401B is the US tool-only listing; PCL401K1 is a battery/charger package.

Motion and size

Orbital quarter-sheet tool; 1/16-inch orbit.

Published speed

Product: 14,000 OPM. Manual page 6: 14,000 r/min (RPM). Conflict retained; no conversion inferred.

Attachment

Clamped non-adhesive or specified adhesive-backed quarter sheets; use the matching punch.

Collection

Nominal 1-1/4-inch or 1-7/8-inch vacuum connection; verify actual cuff and material suitability.

Check before you follow

Identity & documentation.

Brand
RYOBI
Model
PCL401
Tool type
Orbital quarter-sheet sander
Market
United States
Catalog number
PCL401
US product listing
PCL401B
Manual revision used
8-9-22 (REV:02)
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Checked manual: 998000675, 8-9-22 (REV:02). Product and manual speed units conflict.

Manuals & service references

Identify the right document.

These are document reference records, not downloadable manuals. Original manufacturer files are not provided here. Match the exact model and revision before use. A parts reference does not authorize internal repair.

Operator manualPDF

PCL401 operator manual

Model identified in this document

Cover and relevant operating sections match the named body.

Document revision: 8-9-22 (REV:02)

Quarter-sheet paper routes, punch, dust connections and operating sequence.

Original document languages: en, fr, es

Document checked

Keep the limits in view.

  • No hands-on performance testing.
  • No internal tool or battery repair instructions.
  • Confirm exact accessories and serial applicability before replacement.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Keep reading

RYOBI: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • Choosing a RYOBI sander

    Consider PCL406 for open broad surfaces and PCL401 for straight boundaries and its sheet workflow. The unresolved14,000 RPM/OPM label conflict cannot prove it faster than10,000.

  • Match your sander manual

    A familiar brand and colour are only a start. Match body, market, document revision and task section before keeping a file for your machine.

  • Collector emptying workflow

    Separate half-full, coating-dust and end-of-work triggers for 2648, PCL401 and PCL406.

  • Two PCL401 paper routes

    Fit ordinary paper rear-clamp first or remove and replace PSA with front-edge alignment, then punch and inspect; remove PSA before storage.

  • PCL401 bag and vacuum setup

    Fit, empty and refit the bag or connect a suitable nominal 1-1/4- or 1-7/8-inch vacuum hose, then diagnose the paper-to-collector path.

  • RYOBI body versus package

    Both current K1 packages list one PBP005 4Ah and PCG002. B means tool-only for these two listings, not a box with no accessories. Record tool, package and power components separately.

  • Prepare a service request

    Service needs the exact tool, what happened and what remains unknown. Organize existing facts without dismantling or reproducing a fault for video.

The reading behind this guide

Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.

Sources & references.

Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.

  1. RYOBI: PCL401B US product listing

    Checked

    Document checked

    US listing identity and published specifications only; package contents and availability may change. Product says 14,000 OPM; checked manual says 14,000 r/min (RPM).

  2. RYOBI: PCL401 operator manual 998000675

    Revision 8-9-22 (REV:02) · Checked · Pages Cover; English 6–9; illustrations 10–11; back cover

    Document checked

    Applies to the named US body and checked revision; not proof of every serial or regional version. Page 6 labels speed 14,000 r/min (RPM), conflicting with product-page OPM.