Corded Multi-Max with press-and-turn Easy-Lock flange: spring retention is temporary and must be followed by full clockwise hand-tightening.
Matched corded supply
Match the actual US 120 V AC, 60 Hz nameplate and intact cord; the documented 3.5 A body uses the 3–6 A extension-table row.
Complete Easy-Lock clamp
Unplug, loosen counter-clockwise, press, engage all pins flush, release the spring hold and fully hand-tighten clockwise.
Material table and initial entry
For the exact MM480, softwood uses table range 8–10; initial plunge separately starts at medium speed for control before increasing.
Isolated care and service
Unplug before cleaning or storage; the 50–60-hour brush interval means Dremel service-facility work, not owner motor disassembly.
Check before you follow
Identity & documentation.
- Brand
- Dremel
- Model
- MM35
- Tool type
- Corded oscillating multi-tool
- Market
- United States / exact 2018 existing-owner scope
- Catalog number
- MM35
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- Exact 2018 owner scope; no current kit or replacement-blade equivalence.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Dremel: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- MM35 2018 owner system
Match the US 120 V MM35, complete Easy-Lock hand-tightening and use the exact MM480 table for a supported wood sample, with isolated care afterwards.
- Used tool: reject, pause or consider
Check seller evidence, isolated holder completeness, approved power and completion cost before deciding whether a used oscillating tool is worth considering.
- Protected near-flush dowel cut
Use the archived MM35/MM480 wood scope to plan surface protection, a straight cutting plane and an honest nonzero finishing allowance.
- MM35 versus BD200MT: complete parts, not a mixed blade count
Turn a mixed accessory drawer into verified native routes, unresolved adapter holds and a supported clean-wood system decision.
- Plunge or segment blade
Compare exact MM480 and MM450 material approval, approach, both-face corner geometry and support before buying for a loose-softwood opening.
- Removable cardboard insert
Make a shallow organizer from known clamped cardboard with exact MM35/MM430 scope, unpowered corner finishing and a real empty-box fit check.
- Service dossier and replacement
Document exact MM35 or 2526-20 identity, power items, material history and observations without reproducing faults, then separate service findings from replacement qualification.
- Rotary or oscillating cutter?
Choose a qualified straight MM35 route or hand off a curved task with missing evidence; rotary grip eligibility remains unresolved.