FX1271T adds a hammer setting and selectable Turbo operation to FLEX’s 24V drill range. The listed FX1271T-1H kit pairs the tool with a 6.0Ah Stacked Lithium battery and 280W charger; FX1271T-Z is the tool-only identity. Its manual also covers non-hammer FX1171T, so read the model-specific column and controls. The product page describes anti-kickback protection and a supplied auxiliary handle; neither is a guarantee against reaction forces.
Battery platform
FLEX 24V
Controls and model distinctions
Only FLEX selection here with hammer and Turbo settings; Normal high gear 2000 RPM; Turbo high gear 2500 RPM, both no-load values; Largest listed body: 7.2 in and 3.8 lb without battery.
Package identity
FX1271T-1H: FX1271T hammer drill; One 6.0Ah Stacked Lithium battery; 280W rapid charger; Case; Side handle; Bit holder; Belt clip.
Package identity
FX1271T-2B: Kit identity listed in official support index; contents not reverified in this research.
Document applicability
No printed revision identifier has been verified for this document.
Check before you follow
Identity & documentation.
- Brand
- FLEX
- Model
- FX1271T
- Tool type
- Cordless hammer drill/driver
- Market
- United States
- Catalog number
- FX1271T-Z
- US product listing
- FX1271T-1H
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Manuals & service references
Identify the right document.
These are document reference records, not downloadable manuals. Original manufacturer files are not provided here. Match the exact model and revision before use. A parts reference does not authorize internal repair.
Operator manualPDF
Operator manual
Model identified in this document
No printed revision identifier has been verified for this document.
Original document languages: English, French, Spanish
Document checked
Parts referencePDF
Parts reference
Model identified in this document
fuller exploded component view
Match tool label and service applicability. Diagram is not owner-repair authorization. Use the manufacturer/service provider for internal repair.
Document checked
Keep the limits in view.
- Documentation-based introduction; no hands-on review, durability score, or comparative test.
- Battery voltage branding does not establish cross-brand compatibility.
- Do not apply another model’s hammer instructions or parts.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
FLEX: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- Compact, general or Turbo hammer?
Check FX1131 for restricted access, compare FX1151 for ordinary repeated work with two batteries, and choose FX1271T only after establishing a suitable hammer-drilling task.
- FLEX pack and charger checks
Start with the known FX1131 → FX0111 → FX0411 combination, then verify charger input. Voltage, Ah and watts do not replace model numbers.
- FX1151 or FX1271T
For ordinary assembly, compare the FX1151 first. Consider the FX1271T when an identified masonry job actually calls for its hammer action.
- FX1271T Turbo and hammer
Turbo changes only while the tool is stopped and its indicator confirms activation. The manual describes higher speed, unchanged torque and faster battery depletion, not increased material or diameter permission.
- FLEX manuals and service
Read the tool model first, then the cover and the parts sheet’s Body Number, Version and Issue Date. A kit suffix cannot replace those fields.
- FLEX kit contents
-1H provides one 6Ah Stacked Lithium pack and 280W charger; the older -2B provides one 2.5Ah plus one 5Ah and 160W. Check the full suffix first.
The reading behind this guide
Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.
Sources & references.
Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Operator manual
Checked · Pages 9: model/control drawing and specifications; model-specific operating sections follow.
Document checked
- FLEX: Parts reference
Checked · Pages PDF page 1 visually checked: Body 0730058001, Version A, Issue Date 2025/10/31; full current PDF downloaded. Search indexing may retain an older date.
Document checked
Match tool label and service applicability. Diagram is not owner-repair authorization. Use the manufacturer/service provider for internal repair.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Official support lookup
Checked
Lookup record only