FLEX identifies FX1131 as its compact two-speed 24V drill/driver. The official manual also covers hammer model FX1231; hammer-only controls do not apply to FX1131. Its retail kit is FX1131-1A, while the support index lists FX1131-Z as tool only. The manufacturer lists a 5.9-inch length, a ratcheting metal chuck, and 18 driving settings plus drill mode.
Battery platform
FLEX 24V
Controls and model distinctions
Shortest listed FLEX body in this selection: 5.9 in versus FX1151 6.9 in and FX1271T 7.2 in; 650 in-lb manufacturer maximum torque; not a comparative test result; No hammer mode or Turbo mode.
Package identity
FX1131-1A: FX1131 drill; One 2.5Ah battery FX0111; 160W charger FX0411; Bit holder; Belt clip; Soft bag.
Document applicability
Parts cover says FX1131; list entries say FX1131-Z. Body number and Version A are explicitly recorded.
Check before you follow
Identity & documentation.
- Brand
- FLEX
- Model
- FX1131
- Tool type
- Cordless drill/driver
- Market
- United States
- Catalog number
- FX1131-Z
- US product listing
- FX1131-1A
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Manuals & service references
Identify the right document.
These are document reference records, not downloadable manuals. Original manufacturer files are not provided here. Match the exact model and revision before use. A parts reference does not authorize internal repair.
Operator manualPDF
Operator manual
Model identified in this document
No printed revision identifier has been verified for this document.
Original document languages: English, French, Spanish
Document checked
Parts referencePDF
Parts reference
Model identified in this document
fuller exploded component view
Match tool label and service applicability. Diagram is not owner-repair authorization. Use the manufacturer/service provider for internal repair.
Document checked
Keep the limits in view.
- Documentation-based introduction; no hands-on review, durability score, or comparative test.
- Battery voltage branding does not establish cross-brand compatibility.
- Do not apply another model’s hammer instructions or parts.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
FLEX: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- Compact, general or Turbo hammer?
Check FX1131 for restricted access, compare FX1151 for ordinary repeated work with two batteries, and choose FX1271T only after establishing a suitable hammer-drilling task.
- FLEX pack and charger checks
Start with the known FX1131 → FX0111 → FX0411 combination, then verify charger input. Voltage, Ah and watts do not replace model numbers.
- FX1131 compact setup
FX1131 has 18 numbered clutch settings and a drilling position. Do not copy FX1231 hammer controls. Rearrange cramped work instead of gripping less shank.
- FX1131 or FX1151
Favor the shorter FX1131 for restricted access; compare the FX1151-2A kit when buying into the platform and needing a spare battery.
- FLEX manuals and service
Read the tool model first, then the cover and the parts sheet’s Body Number, Version and Issue Date. A kit suffix cannot replace those fields.
- FLEX kit contents
-1H provides one 6Ah Stacked Lithium pack and 280W charger; the older -2B provides one 2.5Ah plus one 5Ah and 160W. Check the full suffix first.
The reading behind this guide
Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.
Sources & references.
Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Operator manual
Checked · Pages 9: model/control drawing and specifications; model-specific operating sections follow.
Document checked
- FLEX: Parts reference
Checked · Pages PDF page 1 visually checked: Body 0710042001, Version A, Issue Date 2025/10/30; full current PDF downloaded. Search indexing may retain an older date.
Document checked
Match tool label and service applicability. Diagram is not owner-repair authorization. Use the manufacturer/service provider for internal repair.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.
- FLEX: Manufacturer reference
Checked
Document checked
Kit/variant identity and tool identity are kept separate. Prices and stock status are not captured.