The US JS314901 is a 120 V, 60 Hz, 6 A corded model with a bevel-lock lever and a separate speed dial.
The JS314901 product page and manual disagree on metal capacity; this family gives no metal-capacity recommendation.
Verified setup distinction
The US JS314901 is a 120 V, 60 Hz, 6 A corded model with a bevel-lock lever and a separate speed dial.
Check before you follow
Identity & documentation.
- Brand
- SKIL
- Model
- JS314901
- Tool type
- Jigsaw
- Market
- United States
- Catalog number
- JS314901
- US product listing
- JS314901
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Only the listed regional model is covered; verify the nameplate before using accessories.
- Manufacturer documents checked; no hands-on performance testing.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
SKIL: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- SKIL JS314901 controls
Learn each control independently and verify the locked zero-bevel foot before relying on an illuminated cutting line.
- SKIL JS313101 versus JS314901
Compare the hex screw and bevel lever, speed selection and visibility on matching loose wood samples.
- Notch a drawer divider
Plan separate entries, prevent thin-stock movement and finish the inner edge before checking a divider notch.
- Check a zero-bevel cut before adjusting the base
Use a repeatable sample to separate fixed alignment from blade deflection.
- Check a corded jigsaw externally when it will not start
Inspect the disconnected power path and controls without opening the saw or bypassing protection.
- Match blade to the cut
Check shank compatibility, working length and turning width, then verify the required surface finish on matching scrap.