Distinct removable spring pin, Starlock/Plus cam engagement, triangular extraction and restart-inhibition signal.

Pin rotation before lever closure

With the battery removed, open the lever 180°, turn the spring pin slightly counterclockwise and remove it. Refit the cam-seated accessory, insert the pin and turn 90° clockwise before closing flush.

Starlock and StarlockPlus

Only the two permitted interface classes and suitable recommended accessories are included; StarlockMax is not approved by this manual.

Triangular extraction only

The dedicated extraction fits the housing flange and is specified only for the triangular sanding plate. Align paper holes and connect a suitable extraction unit.

Restart protection is not isolation

Insertion with the switch ON can inhibit running and flash the tool light; OFF then ON restores deliberate operation. Always insert OFF and remove the pack for adjustments.

Check before you follow

Identity & documentation.

Brand
Metabo
Model
MT 18 LTX BL Q SL
Tool type
Cordless oscillating multi-tool
Market
Austria / product 613088840 / serial 13088..
Catalog number
613088840
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Documentation-based, not hands-on testing.
  • No current kit, universal CAS or charging claim.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Metabo: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • Q SL Austrian owner project

    Match the Austrian 13088 body, turn the spring pin correctly, secure triangular-pad extraction and finish a clamped wood sample with a clear acceptance check.

  • Exact model and kit identity

    Separate machine labels, regional service identities, manual revisions and actual bundle contents before choosing an oscillating-tool owner workflow.

  • FEIN versus Metabo Plus-holder decision

    Compare exact clip-in and quarter-turn pin responsibilities, pad-specific settings, dust scope and separate power systems before a small-wood sanding project.

  • Loose accessory: correct assembly or service hold

    Distinguish a snap holder, threaded bolt and quarter-turn spring pin before correcting a documented omission or handing an unresolved defect to qualified service.

  • Legacy MT 18 LTX versus Q SL

    Choose whether to retain documented OIS inventory or complete a StarlockPlus system, including the different pin action, actual power identity and sanding extraction.