The UK EG Point uses mains heating and 7 mm glue sticks. Its limited off-cord working claim refers to retained heat, not a rechargeable battery or a guaranteed amount of time to finish a joint.
Residual-heat use does not imply an installed battery.
Protect the work area
Use a dry protected surface, keep the work supported and rest the gun on its integrated stand during pauses.
Stick and feed care
Use the recommended 7 mm sticks. Never pull an inserted stick out or introduce solvent, oil or grease into the feed mechanism.
Keep connector work model-specific
Do not infer a cable-detachment procedure from a cordless marketing label. A damaged cable requires the manufacturer or qualified service, not an owner repair.
Check before you follow
Identity & documentation.
- Brand
- Rapid
- Model
- EG Point
- Tool type
- Compact hot glue gun
- Market
- United Kingdom
- Catalog number
- 40302915
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Off-cord working uses retained heat, not an installed battery or an assured working duration.
- Follow the instructions supplied with your exact EG Point for any designed cable detachment; do not infer the procedure from a cordless label.
- A damaged cable requires manufacturer or qualified service, not an owner replacement.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Rapid: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- EG Point paper-craft station
Make space for supported paper, the gun stand and the mains lead before deciding whether residual-heat operation is useful for the job.
- Match stick and temperature
Use the gun identity, the adhesive label and the intended material together; a stick that fits the opening is not automatically the right one.
- Bench setup and cooldown
Separate the hot-tool zone, the workpiece and the finished-item area so a pause or shutdown does not create an unexpected contact hazard.
- Threads, drips and feed faults
Use a short supported trial to distinguish continued feeding, adhesive mismatch and abnormal leakage without forcing or opening the glue gun.
- Battery pen or corded gun?
Compare reach, working rhythm, adhesive choice and storage needs without mistaking a cordless label for battery heating or a power ranking.