A complete documented square-wood setup using the already correctly installed original blade assembly, model-specific controls and suitable connected extraction.

Historical manufacturer manual supplies identity; no current product/kit bridge claimed.

Blade plate / knife / kerf relationship

The existing 235 mm wood blade has plate thickness ≤1.7 mm and kerf ≥2.1 mm around the 2.0 mm knife; blade speed rating must meet the tool’s 4,500 rpm.

Two distinct knife clearances

The diagram specifies separate 1–5 mm distances from the curved knife edge to the toothed rim and from the lower knife edge to the projecting tooth rim.

Front and rear bevel clamps; A/B guide

The 5903R uses front and rear bevel clamps over 0–45°. Its top guide uses A for straight cuts and B for 45° cuts.

Screw-mounted extraction joint

The documented joint attaches using screws, then accepts the hose of a suitable Makita vacuum cleaner; actual compatibility must be verified.

Check before you follow

Identity & documentation.

Brand
Makita
Model
5903R
Tool type
Corded circular saw
Market
Historical M224 existing owner; actual nameplate AC supply
Catalog number
5903R
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

884364M224 EN 20190301; official filename 5143R.pdf also explicitly covers 5903R.

Keep the limits in view.

  • Documentation-based, not hands-on testing.
  • No blade-fitting, plunge or service tutorial.
  • Actual nameplate supply and supplied instructions must match.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Makita: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • 5903R riving-knife owner setup

    A complete existing-owner wood workflow for the M224-documented 5903R: blade and knife relationships, two clearances, twin bevel clamps, A/B guide and connected extraction.

  • Safety features without a score

    Build a model-specific qualification sheet that separates guarding, riving knives, braking, friction clutches, lift sensing and lock-off from physical power isolation.

  • Used-saw reject, hold or consider

    Build a documented pre-purchase decision from exact model identity, isolated external checks and unresolved assembly or service questions, without a powered fault test.