A rail-free solid-wood edge-entry sample joins actual guard, depth, blade/knife, pack and extraction qualification before measured acceptance.

Original blade and knife

Retain original qualified 165 mm/20 mm blade rated at least 6000 rpm. Plate at most 1.6 mm, knife 1.7 mm, kerf at least 1.8 mm; both distinct knife gaps 2–3 mm must already be correct. No fitting.

Commissioned power

Actual DCB606 and DCB118 already commissioned under complete instructions; final manual table explicitly lists the pair. No charging lesson, new compatibility or kit promise.

Isolated depth and bevel

Remove the battery before securing both bevel knobs 7 at zero and depth knob 8. Actual through-cut must coexist with less-than-full-tooth projection; about 3 mm is not an overriding setting.

Controls and references

Front handle 11 and main handle 3, plunge trigger 1 forward then switch 2, rail-free indicator 27 distinct from full-plunge position 29. Forward feed only.

Wood speed and extraction

Solid wood uses documented dial range 3–7, not a guessed rpm map. Always operate a qualified compliant extractor with tight actual 1-1/4 in hose connection and antistatic precautions.

Actual standstill and guard

After normal completion release the switch and wait for complete stop before moving away. Confirm sprung guard coverage, set tool on its side safely and remove battery for inspection. Binding requires motionless hold until stopped.

Check before you follow

Identity & documentation.

Brand
DEWALT
Model
DCS520 Type 1
Tool type
Cordless plunge-head circular saw
Market
Canada, physical Type 1 matched to actual current Canadian Type 1 download
Catalog number
DCS520
Manual revision used
FEB17
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Exact Canadian Type 1 N486591 FEB17. Product 54/41 mm on-track and manual 55 mm on-rail/59 mm rail-free are not synthesized. About 3 mm projection never overrides less-than-full-tooth safety limit; no imported DWS520 kerf threshold or charging approval beyond exact commissioned pair.

Keep the limits in view.

  • Exact Canada Type 1 N486591 original qualified blade/knife, already-commissioned DCB606/DCB118 and actual active compliant extraction. Rail-free square solid-wood edge entry only; no fitting, knife adjustment, charging, rail commissioning, interior plunge, reset, nonwood or kit/region pooling.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

DEWALT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • DCS520 Type 1 qualified wood sample

    Join original blade and knife checks, commissioned DCB606 power, actual tooth depth and active extraction into a complete rail-free square solid-wood sample.

  • DWS520 versus DCS520 system choice

    Compare exact Canadian Type 3 corded and Type 1 cordless systems by real supply, original knife/blade requirements, controls, extraction and a qualified edge-entry task—not motor rankings.