The P306 heats in its battery-powered base and is lifted out for application. Its two lights show power and seating rather than a ready temperature, so the practical check is gentle flow on scrap, not extra force on a resistant trigger.
Follow the P306 operating instructions for initial warm-up and verify flow on scrap; the base LEDs do not confirm temperature readiness.
Dock heating
The gun heats only in the base. Return it to the base if trigger resistance shows the adhesive needs reheating; never force the feed.
Two power indications
The base light indicates power and the gun light indicates its seated connection. Neither is a ready-temperature indicator.
Cooling before battery removal
Switch off and cool completely on the base before removing the battery. The manual requires at least thirty minutes of cooling before storage.
Check before you follow
Identity & documentation.
- Brand
- RYOBI
- Model
- P306
- Tool type
- Compact cordless hot glue gun
- Market
- US; 18V ONE+ Compact Glue Gun
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- The powered base is not a battery charger.
- Use only the specified mini-stick sizes; diameter does not establish adhesive chemistry or material suitability.
- No overhead application, upward-pointing nozzle or electrical-insulation repairs.
- Clean contacts only cold and battery-isolated, with a cotton swab or nonmetal utensil; no internal repair.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
RYOBI: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- Use P306 around its heating base
Plan short applications around a clear return to the P306 heating base; trigger resistance means reheat, not squeeze harder.
- Clean P306 heating contacts safely
Clean only visible cold residue on isolated P306 contacts with a cotton swab or nonmetal utensil; persistent faults require service.
- Compare battery, heating-base and residual-heat glue tools
GluePen heats from an integrated battery, Dremel 940 uses stored heat after cord removal, and P306 heats only in its battery-powered base.