UAE CXT hammer driver drill with separate action-mode and torque rings.
Regional identity
HP333DZ tool-only regional listing; matching HP333D manual, not DF333D.
Controls and setup
Three action modes and 20 torque positions; 0–450 / 0–1700 rpm no-load ranges.
Documented capacity
Wood 21 mm; steel 10 mm; masonry 8 mm; overall length 193 mm.
Check before you follow
Identity & documentation.
- Brand
- Makita
- Model
- HP333DZ
- Tool type
- Cordless drill family
- Market
- United Arab Emirates
- Catalog number
- HP333DZ
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based guidance; no hands-on performance test.
- Match the full nameplate and supplied regional manual before use or service.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Makita: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- DF333DZ vs HP333DZ UAE
Compare the matched UAE CXT drill families by length, modes and material-specific capacity before choosing a household setup.
- HP333DZ three-mode setup
For the UAE HP333DZ listing and HP333D manual, separate the action-mode ring from the 20-position torque ring before moving between screws and holes.