UAE CXT driver drill; DF333D chuck instructions differ from the shared manual’s DF033D section.
Regional identity
DF333DZ tool-only regional listing; matching tool family DF333D, not DF033D.
Controls and setup
20 numbered clutch positions plus drilling; 0–450 / 0–1700 rpm; no hammer mode.
Documented capacity
Wood 21 mm; steel 10 mm; overall length 179 mm before adding the bit.
Check before you follow
Identity & documentation.
- Brand
- Makita
- Model
- DF333DZ
- Tool type
- Cordless drill family
- Market
- United Arab Emirates
- Catalog number
- DF333DZ
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based guidance; no hands-on performance test.
- Match the full nameplate and supplied regional manual before use or service.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Makita: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- DF333DZ cabinet setup
Match the UAE DF333DZ listing to the DF333D manual, verify its model identity and use the 20 clutch positions, while keeping DF033D hex-holder instructions separate.
- DF333DZ vs HP333DZ UAE
Compare the matched UAE CXT drill families by length, modes and material-specific capacity before choosing a household setup.