Two inventories, separate evidence and a written decision
A contrasts separate original bolt/key inventory with an AutoClic press-engagement cue, both battery-isolated. B separates the two extractor evidence cards, with 220 mbar and 34 l/s only on the E60 side. C shows verified, conditional and held card symbols.
A · Check the complete native inventory
UniversalMulti needs its original bolt and hex key beyond magnetic positioning. AdvancedMulti uses isolated AutoClic ejection/press engagement and a security check; both are Starlock only.
B · Keep extraction evidence separate
87V requires its actual suitable Figure D system; E60 Figure C additionally states both installed minima. No generic hose/hood swap or performance ranking follows.
C · Finish the evidence card
Choose an eligible complete system, list exact conditional missing items, or hold both. A controlled isolated sample acceptance follows eligibility, not an uncertain powered fit test.
Original decision schematic, not an exploded holder or installation drawing. A does not make a magnet a clamp or add a bolt to AutoClic. B has no interchange path; 87V’s missing numeric table does not establish lesser dust requirements. C symbols mean documentary eligibility, pending evidence and hold, not certification of hidden condition.
Choose a complete sanding system, not a fastening slogan
The decision here is between two already identified UK owner systems for the same task: dry-sanding an accessible face of clamped, new, untreated, uncoated loose wood. The output is a written eligible, conditional or hold decision for each system, with an exact missing-parts or evidence list. It is not a ranking of material-removal rate, battery endurance or value, and it does not establish that either package is currently sold with everything needed.
The compared bodies are UniversalMulti 18V-32, UK order 0603105000/type 3 603 A05 000, under manual 87V, and AdvancedMulti 18, UK order 0603104000/type 3 603 A04 000, under current manual E60. Match the actual nameplate and supplied instructions. The 87V cover says 2024.02 and its English footer 07.12.2023; E60 is dated July 2026. The declaration for AdvancedMulti supports identity, not an operating method. Do not treat a similar Bosch name, a kit suffix or an older manual as proof of the same system.
For this comparison, both need the actual original Bosch AVZ 93 G triangular plate and a suitable original Bosch Delta 93 wood sanding sheet. Both selected manuals approve Starlock only, not StarlockPlus or StarlockMax. AutoClic is a fastening method, not an automatic upgrade in approved accessory tier. A physically fitting unverified plate does not pass the material, condition or manufacturer-approval checks.
Build two evidence cards while everything is isolated
Set each tool’s switch to 0, wait for complete standstill, press its actual battery release and remove the battery without force. Isolate the extractor under its own instructions before touching connections. Allow used accessories to cool and wear protective gloves for accessory changes. Do not open either motor housing or battery, and do not power an uncertain assembly to identify it.
Give each card six rows:
- Actual model, regional type and matched manual revision.
- Original plate identity and condition, appropriate wood sheet, aligned extraction holes and no previous metal use.
- Complete native fastening parts and a documented isolated seating check.
- Exact body-matched hood, its clamp, adapter, hose and suitable extractor, including the extractor’s instructions and installed qualification.
- An already commissioned, approved battery/charger system with actual instructions and sound condition.
- A sound original auxiliary handle, reachable switch, clear vents and a workholding/PPE plan for the selected wood.
Record present and verified, missing but specifically identified, or unresolved for every row. A photograph can document a label or visible missing part; it cannot establish internal condition, battery capacity, authenticity or installed extraction performance. Cracks, damaged controls, loose hardware, uncertain pack condition or a damaged auxiliary handle stop the selection until qualified correction.
What each mounting card must actually contain
For UniversalMulti, MagnetHold only positions the accessory while you fit it. The card must include the correct original clamping bolt and hex key, not just a plate hanging from the magnet. With battery removed, the accessory’s depressed centre faces down and its text remains readable from above. It must engage the holder cams in the chosen position; the original bolt is tightened with the hex key until flush with the accessory. An isolated secure-seating check and removal of the key complete this route. Missing bolt or key is not cured by magnetic attraction, an extra washer or a borrowed fastener. Follow the manual’s precautions around implants, medical devices and magnetically sensitive equipment; do not invent a clearance distance.
For AdvancedMulti, the card instead needs a sound actual AutoClic mechanism and its matched original plate. Fully opening the lever ejects the fitted accessory. Place the replacement on a level surface, depressed centre down/text up, then press the tool onto it at the required orientation until it audibly engages. Check secure seating while isolated. Do not add UniversalMulti’s bolt, a magnetic-hold stage or an invented instruction to lower the lever after pressing. Failure to engage securely is a hold for correct instructions or qualified service, not a reason for a powered wobble test.
These are evidence checks, not two interchangeable mounting recipes. A complete UniversalMulti hardware set can make that system the practical candidate even when someone prefers the phrase “tool-free”; a complete AdvancedMulti holder can be preferable to buying unidentified replacement fastening parts. Neither conclusion says one mechanism cuts or sands better.
Extraction can reverse the apparent choice
Both manuals require extraction for sanding. There is no exemption for a small test face. The UniversalMulti card must match its actual Figure D assembly; the AdvancedMulti card must match Figure C. Similar-looking collars or the shared plate name do not establish hood, clamp, adapter or hose interchangeability.
In each documented installation, with tool and extractor isolated, remove any fitted accessory and depth stop before the hood goes fully over the holder onto the tool collar. Orient the hood away from directly underneath and close its own clamping lever. Complete that body’s specified adapter/hose/outlet connection, then install the plate by that body’s fastening method and align the sheet holes. These hoods are sanding-only: neither card gains a saw-blade capture capability.
The dated requirements must stay separate. UniversalMulti 87V requires a suitable extractor for the material, with a special extractor for dry dust especially harmful to health or carcinogenic. It does not give the later E60 numerical table. That absence is not evidence of better or worse dust performance, nor permission to ignore the actual extractor instructions or run without extraction.
AdvancedMulti E60 explicitly requires at least 220 mbar and at least 34 l/s at the tool connection. Its 35 mm hose and HEPA or class M filter entries are recommendations, not a replacement for the two installed minima. A disconnected vacuum rating, suction sound or a hand over the hose does not establish those values. If installed qualification is absent, mark AdvancedMulti conditional or hold; do not invent a home performance-measurement method.
For either route, actual equipment must be suitable for the wood and its hazards, properly connected, operating and checked under its own instructions before sanding. Provide ventilation and appropriate eye, hearing and respiratory protection; E60 explicitly requires suitable breathing protection, while 87V advises a P2 filter-class mask. A stricter actual material or equipment requirement still governs. Avoid overheating and dust accumulation; empty dust collection before breaks under the actual extractor’s safe instructions. Unknown coatings or unresolved dust hazards put both systems on hold.
A shared battery family is not a commissioning instruction
Both selected manuals list PBA 18V…W-. batteries and AL 18… chargers, while explicitly excluding AL 1814 CV, AL 1820 CV and AL 1860 CV for those packs. Record the actual already commissioned approved combination and its supplied instructions separately for each proposed system. A physically sliding pack, a charger with a similar name or a lit gauge is not enough. This comparison does not select a new pair, give a charging tutorial or authorise an adapter.
Keep temperature contexts separate as well. UniversalMulti’s tool operation/storage table is −5 to +50 °C; AdvancedMulti E60 gives −15 to +50 °C. Both list recommended charging ambient 0 to +35 °C, while their battery-handling paragraphs give battery storage −20 to +50 °C. These are not interchangeable limits or a reason to operate a questionable cold or hot pack. Actual battery/charger instructions and condition still apply; the differing lower tool limits are not a runtime or sanding-performance ranking.
Work through three realistic choices
Card A: complete UniversalMulti, incomplete AdvancedMulti extraction. Suppose the owner has the identified original UniversalMulti plate, bolt/key, sound handle, exact Figure D extraction with actual suitability established, and an approved commissioned power system. The AdvancedMulti body and plate are sound, but its installed E60 performance evidence is missing. UniversalMulti can be eligible for the bounded task after all checks; AdvancedMulti remains conditional pending that exact evidence. Do not move the UniversalMulti hood over and assume the gap is solved.
Card B: complete AdvancedMulti, missing UniversalMulti bolt. Suppose the AdvancedMulti’s original plate engages securely, its exact Figure C system meets both installed minima under the extractor’s instructions, and power and workholding are qualified. The UniversalMulti has only magnet-held accessories and an unidentified spare screw. AdvancedMulti can be eligible; UniversalMulti remains conditional on the correct original parts and isolated secure assembly. Price or urgency does not turn the spare screw into evidence.
Card C: neither complete. If the only plate is StarlockPlus, the available charger is one of the excluded models, the wood coating is unknown, or neither extraction route is qualified, select neither. Write the specific unresolved requirement and request the relevant manufacturer, equipment or qualified-service evidence. Do not buy another bare body merely to avoid identifying the missing system component.
Close the decision with a controlled sample, not a sales ranking
Eligibility is permission to proceed to the exact owner’s complete setup, not a certificate of hidden condition. Secure the known dry wood, use both hands with the original auxiliary handle, keep the switch reachable and vents clear, and operate the qualified extraction. Both systems limit sanding to level 4 maximum, with any lower accessory limit respected. Use light consistent pressure and keep the plate moving to avoid local heat; more force is not a shortcut. AdvancedMulti’s automatic light is not a readiness indication, and you must not look directly into it.
Switch rearward to 0, wait for complete stop before setdown, remove the battery and isolate equipment before changing or inspecting parts. An automatic cutoff still requires explicit OFF; an unexplained condition remains a hold rather than a repeated restart trial. Accept the isolated sample only when the intended face is uniformly worked without unwanted rounding, gouges, scorching or shifted stock. Record an unsuccessful sample as a specific setup/consumable correction or service hold, not proof that the other model is superior.
The final card should name the selected whole system, the exact supporting documents, every unresolved item and the condition that would reopen the decision. That is a usable owner choice even when the correct answer is “neither yet.”
Source basis: exact UK UniversalMulti 18V-32 product and 87V manual, especially English pages 17–22 and Figures A–D; exact UK AdvancedMulti 18 product, E60 English pages 17–24 and Figures A–C, with F1H declaration for identity only. Existing exact owner records are reused without changing their source limits.
Models referenced