A complete dry bare-wood face project only with the actual original pad, bolted MagnetHold seating and qualified native extraction.
Magnet positioning still needs the bolt
With switch 0, complete stop and battery removed, engage the actual holder cams, install the original bolt and tighten flush using the original hex key. Check secure seating and remove the key; magnet-only retention is not ready.
Original AVZ 93 G and wood sheet
Identify the actual original 93 mm plate and appropriate original Bosch wood sheet. Align the holes and press the sheet on; use an intact sheet that has not worked metal.
Native extraction before the plate
With both tool and extractor isolated, remove the old accessory and depth stop, fit the Figure D hood fully on the collar, orient it away from directly underneath, and close its lever. Complete the matched adapter/hose/extractor route under actual instructions.
Two hands and sanding maximum 4
Use a sound original auxiliary handle and firm two-handed control with vents clear and switch reachable. Sand at no more than level 4, respecting lower accessory limits; switch OFF after automatic cutoff and hold unresolved faults.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- UniversalMulti 18V-32
- Tool type
- Cordless oscillating multi-tool
- Market
- United Kingdom; 0603105000 / 3 603 A05 000
- Catalog number
- 0603105000
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Starlock only; StarlockPlus and StarlockMax are explicitly excluded.
- Actual complete Figure D extraction is mandatory for sanding; no small-area exemption or legacy hood assumption.
- Commissioned PBA 18V…W-. / compatible AL 18… only; excluded chargers and distinct temperature contexts remain. No new charging recipe.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- UniversalMulti bolted sanding setup
Build the actual native extraction and original bolted pad system, then sand and inspect an accessible bare-wood face.
- Choose the complete sanding system
Compare original fastening, native extraction and commissioned power evidence to select an eligible system or record an exact hold.