Use the ENEU HW1200 layout, distinguish its inlet requirement from output flow, and avoid importing HW1300 reel instructions.

Published specifications, not hands-on performance measurements.

Manufacturer supplies model identifier HW1200; no separate catalogue number verified.

UAE promotional HW1200 reel claim and regional wattage conflict are excluded from scoped ENEU specifications.

Power and market

ENEU manual identity; verify actual regional voltage plate. Conflicting regional input-wattage claims omitted.

Pressure ratings

Working 100 bar; maximum permissible 120 bar.

Flow and inlet supply

Water flow 5.5 L/min; maximum feed volume 7 L/min. Manual requires inlet supply strictly greater than that feed volume, not merely output. Inlet 10 bar/40 °C; supply hose ≥ 13 mm; optional approved suction lift ≤ 1 m.

Hose and controls

10 m hose; detachable machine-end hose and on/off switch, no reel.

Matched documentation

ENEU manual 885542B229, printed pages 3, 5–8 and 10–14. The after-use powered drain is model-specific: stop when empty and never exceed 1 minute, then switch off and unplug. It is not a maintenance or fault-testing procedure. Conflicting UAE reel and regional wattage claims are excluded.

Check before you follow

Identity & documentation.

Brand
Makita
Model
HW1200
Tool type
Mains-powered domestic pressure washer
Market
ENEU manual version; verify the actual regional rating plate
Catalog number
HW1200
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

ENEU manual 885542B229, printed pages 3, 5–8 and 10–14. The after-use powered drain is model-specific: stop when empty and never exceed 1 minute, then switch off and unplug. It is not a maintenance or fault-testing procedure. Conflicting UAE reel and regional wattage claims are excluded.

Manuals & service references

Identify the right document.

These are document reference records, not downloadable manuals. Original manufacturer files are not provided here. Match the exact model and revision before use. A parts reference does not authorize internal repair.

Operator manualPDF

HW1200 matched operator manual

Model identified in this document

ENEU manual 885542B229, printed pages 3, 5–8 and 10–14. The after-use powered drain is model-specific: stop when empty and never exceed 1 minute, then switch off and unplug. It is not a maintenance or fault-testing procedure. Conflicting UAE reel and regional wattage claims are excluded.

HW1200 exact scoped operator instructions and technical labels; apply only with matching regional plate.

Original document languages: en

Document checked

Keep the limits in view.

  • Published specifications and instructions, not hands-on performance testing.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Keep reading

Makita: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • Makita HW1200

    Use the ENEU HW1200 layout, distinguish its inlet requirement from output flow, and avoid importing HW1300 reel instructions.

  • Makita HW1200 vs HW1300

    Compare matched ENEU working pressures, equal hose reach, the HW1300 reel and low motor mode, and the shared tank-supply option.

The reading behind this guide

Source records describe the evidence used for this guide. Original manufacturer files and external videos are not provided here.

Sources & references.

Manufacturer documents and public safety references are the starting point. Check each source’s scope and confirm the exact model, market, and revision for your tool.

  1. Makita: HW1200 regional identity/product record

    Checked

    Document checked

    UAE HW1200 reel/power wording conflicts and is not used for those fields; UK catalogue used only for documented 10 m hose. No blanket regional equivalence.

  2. Makita: HW1200 matched operator manual 885542B229

    Checked · Pages Printed pages 3, 5–8, 10–14

    Document checked