Cammed accessory holder with a removable spring pin and lever that must close against the housing, plus explicit OFF action after interrupted mains power.
Matched mains and RCD
Match actual nameplate voltage and frequency and provide an upstream RCD with at most 30 mA trip current; unplug before setup.
Spring pin and flush lever
With the plug out, engage accessory cams, insert the spring pin fully and close the release lever to its stop against the housing; beware snap-back pinch.
Power interruption OFF
The forward slide runs continuously. Move it backward OFF when unplugged or after a power cut; no electronic restart prevention is assumed.
Sanding-only extraction
The collar extraction assembly is only for the triangular sanding plate, with the illustrated 28 mm hose connection and aligned 93 mm sheet holes.
Check before you follow
Identity & documentation.
- Brand
- Metabo
- Model
- MT 400 Quick
- Tool type
- Corded oscillating multi-tool
- Market
- Europe / exact owner type 01406000 and actual regional nameplate
- Catalog number
- MT 400 Quick
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- No cordless equivalence or universal adapter claim.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Metabo: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- MT 400 Quick corded owner
Match the 0122 corded body, qualify the RCD supply, complete the spring-pin clamp and cut supported wood without assuming restart protection or blade-hood extraction.
- A specification worksheet, not a speed ranking
Use exact GOP18V-34 and MT 400 Quick source values to normalize angle notation, separate unlike quantities and produce a defensible requirement-based shortlist.