An original Festool US owner system with an 18 V BP 18 prerequisite, click-in mounting and separately qualified material-specific extraction.
Two clicks in the correct order
With OFF, complete stop and battery removed, cool and remove the old accessory. Close the lever until it clicks before pressing the device onto the correctly oriented original accessory until it clicks; inspect secure seating without power.
Original USB wood blade
The US product names USB 78/32/Bi/OSC; exact catalog order 203337 adds wood application prose and 78 x 32 mm geometry. No strongest solid-wood suitability or installed depth follows from those dimensions.
Actual power and deliberate control
Use only the qualified original BP 18 system with its actual battery and specified charger instructions. Confirm 0 before pack insertion; move to OFF immediately after loss of power. Respect actual accessory speed marks, not an invented universal wood setting.
Extraction is a complete prerequisite
With the battery removed and extractor isolated, the original adapter precedes the extraction device and hose. Its two-screw 7 Nm value is not a blade-clamp torque. Qualify and operate the actual material-specific extractor before cutting; keep both grips and vents clear.
Check before you follow
Identity & documentation.
- Brand
- Festool
- Model
- OSC 18
- Tool type
- Cordless oscillating multi-tool
- Market
- United States; 576589 and 718544_J matched owner scope
- Catalog number
- 576589
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Original Festool accessories and consumables only despite listed interface tiers.
- No named charger, mains power adapter, kit-in-hand or automatic guided-plunge qualification.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Festool: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- OSC 18 US owner system
Complete a visible loose-wood edge cut with the exact original USB blade, commissioned BP 18 system and qualified dust extraction.
- OSC-AH guided through-slot
Qualify the original adapter, blade, depth stop, full-base support and active built-in extraction before one controlled plunge and both-face acceptance.
- Depth stop or guided plunge?
Distinguish continuous stop contact for an inspectable shallow kerf from full-base support for one guided through-slot.