An existing-owner route with an eight-pin native clamp and proportional momentary trigger. Match the actual nameplate and July 2013 instructions before qualifying supply or accessories.

Actual supply, not an assumed rating

Match the physical Type 1 nameplate and supplied N252379 document. Qualify the actual outlet, extension and cord condition; the document does not assign current product amperage or cord length to every body.

Eight-pin native seating

Establish OFF, cancelling any lock-ON, wait for complete standstill and unplug; then cool the old accessory, squeeze the lever and remove it. Clean shaft and holder, insert the correct recommended native blade engaging all eight pins and sitting flush, then release and check while isolated.

Proportional trigger and lock cancellation

More trigger pressure increases speed. Either-side button movement with the trigger depressed locks ON. Press the trigger again, then release it to cancel and stop; establish fully OFF while unplugged before connection.

Guide and service boundaries

The optional front-slot depth arm differs from side-slot marked-line tracking; neither proves hidden clearance or an edge-fence contact. Unplug for changes and inspection; repeated circuit trips or damaged cord/switch require qualified service.

Check before you follow

Identity & documentation.

Brand
DEWALT
Model
DWE315 Type 1
Tool type
Corded oscillating multi-tool
Market
United States; actual Type 1 and N252379 JULY13 match
Catalog number
DWE315
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Historical Type 1 document scope, not a current kit or supplied revision guarantee.
  • No assumed amperage, OPM, three-speed selector, lock-OFF or timed shutdown.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

DEWALT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • DWE315 Type 1 corded trigger

    Use the matched July 2013 manual, actual nameplate supply and recommended native wood blade for a controlled loose-stock cut with unplugged acceptance.

  • Multi-tool or jigsaw?

    Choose by entry, continuous support, the entire moving blade envelope and the retained/waste plan—not by an assumed exclusive ability to plunge.