A dated US corded owner workflow keeping native direct mounting separate from the adapter, and retained speed separate from the forward/backward slide switch.
Type 2 and dated instructions
Match the physical BD200MT Type 2 body to 90613711, June 2014, filed in the official BD200MTB/2 service branch. The generic FAQ’s different earlier document is not a substitute or a source of this body’s amperage.
Native clamp without adapter
Switch OFF, wait for a stop and unplug. Squeeze the release lever, clear the holder, orient the working edge away, fully engage the blade on the actual pins and seat flush. Release and verify secure retention.
Independent retained speed
The six-position dial retains its setting; forward slide starts and backward slide stops. Fully OFF before plugging in. Approximate speed references are not a precise tachometer; wood generally uses 4–6, with lower trials when unsure.
Separate adapter and wood scope
The native BDA1214 blade is used directly for this clean wood project. The manual forbids its adapter with native BLACK+DECKER accessories. Adapter components do not establish blanket compatibility or belong in the native stack.
Check before you follow
Identity & documentation.
- Brand
- BLACK+DECKER
- Model
- BD200MT Type 2
- Tool type
- Corded oscillating multi-tool
- Market
- United States / exact Type 2 existing owner
- Catalog number
- BD200MT
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- June 2014 document-scoped existing owner, not latest instructions or current kit.
- No amperage pooled from the older generic FAQ; actual nameplate supply controls.
- No adapter with native BLACK+DECKER accessories or blanket present-day compatibility.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
BLACK+DECKER: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- BD200MT Type 2 native-holder project
Match the June 2014 Type 2 instructions, install the native BDA1214 without an adapter and complete a supported wood cut with the retained speed and slide switch under control.
- Loose PVC: stop rolling and check the whole end
Use an exact PVC-approved native blade, anti-roll holding and a continuous reference plane to complete and inspect a loose tube cut without claiming a service-ready joint.
- MM35 versus BD200MT: complete parts, not a mixed blade count
Turn a mixed accessory drawer into verified native routes, unresolved adapter holds and a supported clean-wood system decision.