Qualify the actual main-handle operating route, original wood assembly, commissioned power and active native extraction before a complete supported square sample.
Actual grip qualification
Model-specific ordinary main-handle route only; actual conflicting two-hand marking or supplied instructions requires manufacturer clarification. Free hand never holds stock or waste.
Original compact assembly
Original approved 115 mm/9.5 mm wood blade rated at least 6000 rpm and correct existing hardware required; no 10 mm rounding, ring conversion or fitting recipe.
Commissioned power and isolation
Actual BY519702/QC536001 already commissioned under complete own instructions. OFF/full standstill then front pack release/full removal before checks; tool operation −10 to 40°C is not a charging range.
Separate knobs and left zero notch
Battery out: motor-side depth knob and actual bracket/upper-guard marks set through-cut with less than a full tooth; separate front bevel knob locks zero. Left notch is 0°, right 45°.
Native extraction and guard
Existing supplied adapter and suitable documented 32mm active extractor required; no hose interference. Isolated guard must freely return instantly without contact at all angles/depths.
Actual stop and acceptance
Thumb lock-off then held trigger/full speed before contact; controlled main-handle feed, actual full stop and guard cover before setdown, battery out for measurement. LED afterglow is not a timer.
Check before you follow
Identity & documentation.
- Brand
- SKIL
- Model
- CR5435B-00
- Tool type
- Cordless compact circular saw
- Market
- US, actual CR5435B-00 and supplied 01/22 document matched
- Catalog number
- CR5435B-00
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Ordinary Figures11–13 and current One-hand designation support the bounded main-handle route. Generic two-hand symbol remains conditional on actual markings/instructions; conflicts require manufacturer clarification. No auxiliary grip, ring conversion or tile scope inferred.
Keep the limits in view.
- Actual US CR5435B-00 / 01/22 original approved 115 mm, 9.5 mm wood blade rated at least 6000 rpm, commissioned BY519702/QC536001 and existing native active 32 mm extraction. Model-specific ordinary main-handle route only; conflicting actual two-hand marking or supplied instructions means manufacturer HOLD, no invented auxiliary grip. No stock/waste handholding, tile/metal/masonry/wet cutting, fitting/ring conversion, charging, rail/plunge or reset recipe.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
SKIL: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- CR5435B compact owner
Resolve the exact main-handle operating scope, original 115 mm assembly and commissioned power before a fully supported crosscut with active native extraction.
- WORX/SKIL compact system choice
Compare actual supply, original assemblies, native dust control and grip evidence before selecting an eligible supported wood-cutting workflow.