Qualify the original assembly and complete base support, distinguish depth edge 10 from FS 9, central glass guard and seven-position extraction, then use the documented guarded-head start and actual stopped removal.

Original assembly gate

Original genuine 628026000, 165 × 20 mm, 42 WZ wood blade, correct existing 20 mm flange orientation, 1.0–2.0 mm plate/max 2.6 mm kerf, full-speed rating and EN 847-1 approval must already be established; no fitting.

Commissioned power only

Actual 625368000 18 V 5.5 Ah LiHD and ASC 145 must already be commissioned under complete matching instructions. Accessory listing is not a charging tutorial or kit promise.

Isolated square settings

With battery removed, both bevel screws 5 lock zero; depth button 13 moves/releases at ordinary edge 10, not FS 9. Actual through-cut leaves no more than half a tooth below stock; glass guard 30 is central.

Seven-position extraction

With tool and extractor isolated, connector 28 pushes fully in, rotates and pulls out to lock in one of seven positions. Actual suitable extraction must run correctly before cutting; no invented pressure or bag substitution.

Cordless wood speed

With battery removed, wheel 21 selects 12 for wood in the cordless column; the corded 6 is not equivalent. Unknown configuration is a hold, not a trial reset.

Complete support and stopping

The guarded upper head starts with the whole base on supported stock. Hold 17 forward then use 18/full speed, slowly lower and feed. A normal clear-arc exit precedes OFF; actual standstill precedes removal and controlled covered return. Binding instead requires immediate OFF and motionless hold.

Check before you follow

Identity & documentation.

Brand
Metabo
Model
KT 18 LTX 66 BL
Tool type
Cordless plunge cut circular saw
Market
UK actual technical identity 01866001, supplied 0526 matched only
Catalog number
601866840
Manual revision used
0526
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep cordless wood dial 12 separate from corded 6. Product versus manual weight/noise bases are not reconciled or ranked. Exact 01866001 is not automatically 01866000; service electronic part naming does not establish another saw body.

Keep the limits in view.

  • Exact UK 01866001 with supplied 0526 instructions, original correctly qualified 628026000/20 mm assembly and commissioned 625368000/ASC 145 only. Controlled base-on-stock open-ended wood sample with complete support and clear normal exit; no front-shoe-only start, enclosed opening, fitting, flange conversion, rail commissioning, charging, reset, cooling run or corded-control transfer.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Metabo: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • KT 18 LTX 66 BL 0526 owner

    Qualify the exact 01866001 original system, ordinary depth reference, central glass guard and seven-position extraction before a complete supported straight sample and stopped acceptance.

  • KS 66 versus KT 66 owner choice

    Choose between the exact EU KS and UK KT systems by supported entry, complete clear finish, original assembly, controls and qualified dust/power—not a shared 66 mm headline.