A half-tooth depth limit, two fence clamps, an eight-position dust connector and the current three-signal shutdown distinguish this original-assembly owner task.

Original EU assembly

165 mm diameter, 20 mm bore, 1.0–2.0 mm body and maximum 2.6 mm kerf. Genuine Metabo wood blade conforming to EN 847-1, suitable for 4800 rpm; no use of the other flange face as a conversion instruction.

Commissioned power

Existing qualified listed genuine 18 V LiHD pack: 625368000 5.5 Ah, 625369000 8 Ah or 625549000 10 Ah. At least 5.5 Ah is a performance recommendation, not an asserted absolute minimum; no charger setup.

Depth and bevel

Remove the battery before adjustment. Set no more than half-tooth projection and push depth lever 17 fully down. Separate screw 14 locks bevel; square task excludes undercut button 13 and factory calibration.

Fence and indicator

With the battery removed, secure both fence clamping levers 2. Align the edge-following fence rail parallel to the blade, not its transverse bars. Mark 15 is a starting width; the left red indicator edge 12 is for square cuts.

Indexed extraction

With the battery removed, push connector 3 fully in, rotate and pull out to lock one of eight positions. Connect suitable extraction and check the whole hose path clear of guard, work and travel.

Current protection signals

0526 documents kickback-related shutdown with three beeps and three tool-LED flashes. Release the trigger and await standstill; this is not immunity, isolation or clearance to resume. No live test or recovery recipe.

Check before you follow

Identity & documentation.

Brand
Metabo
Model
KS 18 LTX 66 BL
Tool type
Cordless circular saw
Market
EU 11866000 / 11866.., 17027689_00_0526, original 165 x 20 mm assembly
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Current service-linked 0526 evidence replaces no historical source object. Historical flange-setup candidate held; new owner slug counts this hardware once. No flange conversion or protection-recovery procedure.

Keep the limits in view.

  • Exact EU 11866000 / 0526 original 165 x 20 mm wood assembly and already commissioned listed genuine pack only. No flange conversion, blade fitting, charging, plunge, guide-rail commissioning, bevel task, calibration or protection-recovery tutorial; no retail kit promise.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Metabo: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • KS 66 BL current owner sample

    Qualify the original EU assembly, lock half-tooth depth and both fence clamps, route indexed extraction and interpret current shutdown signals without a restart tutorial.

  • KS 66 versus KT 66 owner choice

    Choose between the exact EU KS and UK KT systems by supported entry, complete clear finish, original assembly, controls and qualified dust/power—not a shared 66 mm headline.