A complete documented square-wood setup using the already correctly installed original blade assembly, model-specific controls and suitable connected extraction.
Current exact service page links the reviewed 0526 manual and 1025 general safety.
Half-tooth depth setting
Depth screw 7 and scale 6 set the motor against guide plate 8; verify no more than half a tooth projects below the workpiece.
Two bevel screws and separate 47° limit stop
Both bevel screws 2 must lock. Separate stop 12 is pushed down to extend the maximum from 45° to 47°; it is not the bevel lock.
Right-entry rip fence and sample width
Fence 14 enters from the right, is read at mark 15 and locks with screw 16. A scrap cut establishes exact width.
Screw-secured extraction adapter
Adapter 9 is secured with its socket-head screw before connecting suitable extraction. The hose must not impede the guard or travel.
Check before you follow
Identity & documentation.
- Brand
- Metabo
- Model
- KS 55 FS
- Tool type
- Corded circular saw
- Market
- Exact 00955000 existing owner; actual nameplate supply
- Catalog number
- 600955000
- Bulletin starting serial
- 00955 (confirm applicability)
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- No blade-fitting, plunge or service tutorial.
- Actual nameplate supply and supplied instructions must match.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Metabo: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- KS 55 FS owner setup
Check the 00955-series KS 55 FS depth lock, twin bevel screws, right-entering fence and secured extraction before a supported wood sample.
- KS 55 FS versus KS 85 FS owner choice
Compare actual depth needs, the KS 85 FS riving-knife conditions, distinct parallel guides and real supply/support/extraction requirements without ranking safety or inventing fitting procedures.