Separate rear depth and front bevel levers, the A square reference and a conventional trigger define a complete supported wood sample. Hypoid naming grants no oil-service or maintenance-free procedure.
Original US assembly
Manual 185 mm / 7-1/4 in blade and 4500 rpm; current US product specifies 5/8 in arbor. Retain the qualified original wood assembly; reversible-flange and Ring 17 instructions are outside this operation-only scope.
Independent adjustments
Unplug before moving the base with the rear depth lever or setting zero with the front bevel lever; tighten both securely. This workflow uses less than one full tooth below the wood.
Square sight reference
A is the square-cut reference; B is 45 degrees. Verify actual square kerf and guide contact on supported scrap; do not transfer a different model offset.
Trigger and stopping
Check proper trigger return to OFF before connection. Pull to run, release to stop; require actual complete blade standstill and guard coverage before setdown, without a brake-time assumption.
Supported owner sample
Both front grip and rear handle are used with the broad base on supported retained wood. Keep waste independently supported and free to separate, clamps and cord outside the blade route.
Maintenance boundary
Manufacturer hypoid and oil-bath naming does not prescribe owner oil service or eliminate maintenance. No SPT77 oil-level procedure, flange conversion, brush repair or calibration is transferred.
Check before you follow
Identity & documentation.
- Brand
- Makita
- Model
- 5477NB
- Tool type
- Corded circular saw
- Market
- US 5477NB, actual nameplate and current product-linked 884849A941 / 5477NB-1
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Exact current US product-to-manual bridge freshly verified. Preserve manual 185 mm, original regional assembly and nail-free safety rule; conflicting product/manual weights excluded.
Keep the limits in view.
- Exact US 5477NB under 884849A941 / 5477NB-1, actual nameplate and already correctly installed approved original wood assembly. Square edge-entry nail-free loose wood only; no reversible-flange/ring conversion, blade fitting, high-angle, plunge, oil, brush, calibration, brake or extraction-retrofit tutorial. No old kit, weight reconciliation or maintenance-free inference.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Makita: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- 5477NB original-assembly owner
Match the US original blade assembly, rear depth and front bevel levers, A reference, supply and support before accepting a square wood sample.
- 5477NB vs SPT77 ownership
Compare exact original blade assemblies, documented oil obligations, controls, supply and support to make a qualified hypoid-versus-worm-drive ownership decision.