A complete original-assembly sample with separate depth and incline controls, commissioned battery power, known mode and required sound-tool brake check.

Original assembly

Retain the qualified genuine wood blade: 7-1/4 in (185 mm), 5/8 in (15.9 mm), suitable for 6000 rpm maximum and actual nameplate, EN 847-1. Manual 115750M versus current product 115757M does not establish replacement equivalence.

Commissioned power

Actual genuine BSL36B18 and UC18YSL3 must already be commissioned under full separate instructions. No generic MultiVolt approval, AC adapter, charging or USB tutorial.

Separate controls

With battery removed, use cutting-depth lever to set less than a full tooth below work; tighten. Set zero with separate incline lever and tighten. Lock lever is the spindle lock, not depth control.

Known mode

Known prior configuration is required. Auto Switch is 6000 rpm with load-dependent change; selected High Torque stays selected. Manual 4500 versus product 4300 remains unresolved; no trigger priming or selector setup taught.

Dust and cut reference

With battery removed, verify existing approved collector 380086 and M4 screw, suitable connected hose. Operate the extractor under its instructions. Zero uses the right front-notch edge, not the left 45-degree reference.

Brake and stopping

Manual requires proper brake operation before use, only a normal sound-tool clear guarded check here; failure requires authorized service. Actual standstill and guard coverage still govern withdrawal and setdown.

Check before you follow

Identity & documentation.

Brand
Metabo HPT
Model
C3607DB
Tool type
Cordless circular saw
Market
United States / actual C3607DB with North American C99749561G 306 July 2023 instructions
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Actual current US product links this July 2023 NA manual. High Torque 4300 product versus 4500 manual, blade 115757M versus 115750M and charging-text conflicts remain explicit; no kit or regional equivalence.

Keep the limits in view.

  • Exact US C3607DB / C99749561G 306 July 2023, original qualified wood assembly, known commissioned mode and actual commissioned BSL36B18 / UC18YSL3 only. No charging, USB, AC adapter, mode priming, fitting, calibration, plunge, high-angle, reset or powered fault testing. Preserve 4300/4500 speed and blade-part conflicts.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Metabo HPT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • C3607DB known-mode owner

    Qualify exact original assembly and commissioned power, identify separate controls, retain mode-source conflicts and complete a measured wood sample.

  • C7SB3 versus C3607DB systems

    Choose a documented corded or commissioned cordless route for one supported wood task, without torque rankings or borrowed controls.