Original knife/blade qualification, two bevel locks, actual tooth depth, matched start controls and active extraction precede one supported square solid-wood sample.

Original blade and knife

The retained original 165 mm/20 mm blade is rated at least 6000 rpm and above actual tool speed. Plate at most 1.6 mm, knife 1.7 mm and kerf at least 2.2 mm; both distinct knife gaps 2–3 mm must already qualify. No fitting or knife adjustment.

Isolated square depth

Unplug before setting both E bevel knobs to zero and securing depth knob F. Verify actual half-tooth projection within the less-than-full-tooth rule; about 3 mm is not a universal scale setting.

Matched start controls

A plunge trigger and B switch operate the familiar actual tool. Preserve general-start versus cutting-section wording without inventing release/repress choreography; unknown actual operation holds the task.

Actual wood speed

The manual lists 1750–4200/min and solid-wood settings 3–5. Establish the actual appropriate setting while isolated; no performance ranking or nonwood tutorial.

Mandatory extraction

The actual connected active extractor must be designed to relevant dust-emission regulations and operated under its own instructions. Port marketing is not universal adapter approval or guaranteed collection.

Stop before lift

At normal completion release the trigger and wait for actual complete stop before lifting; verify sprung guard coverage before setdown. Binding/interruption requires release and motionless hold until stop, not a recovery recipe.

Check before you follow

Identity & documentation.

Brand
DEWALT
Model
DWS520 Type 3
Tool type
Corded plunge-head circular saw
Market
Canada, exact physical Type 3 matched to current DWS520K Type 3 download
Catalog number
DWS520
Manual revision used
MAR14
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Actual Canada Type 3 linked MAR14 manual retained. Product 54 mm versus manual 55 mm on-track capacity and about 3 mm versus half-tooth depth wording are not synthesized. General A/B start and cutting-section wording is preserved; no invented choreography or plunge-only U steps.

Keep the limits in view.

  • Exact Canadian Type 3 N394705 original qualified wood blade/knife and actual supply/extraction only. Rail-free edge-entry square crosscut, not interior plunge. No fitting, knife adjustment, track commissioning, U reset, trapped-tool recovery, nonwood or kit/region pooling.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

DEWALT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • DWS520 Type 3 original-system crosscut

    Qualify the original blade and riving knife, actual depth, matched A/B controls and active extraction before one supported solid-wood crosscut, with complete stop before lifting.

  • DWS520 versus DCS520 system choice

    Compare exact Canadian Type 3 corded and Type 1 cordless systems by real supply, original knife/blade requirements, controls, extraction and a qualified edge-entry task—not motor rankings.