The exact current dust-system gate, compact single handle and separate depth references define this square sample. A small body does not waive installed extraction or original-assembly qualification.
Original assembly
85 mm diameter, 15 mm bore, body at most 1.0 mm and tooth width 1.0–1.5 mm; retain the qualified original wood assembly meeting EN 847-1:2017 and rated higher than the tool’s 1400 rpm. No fitting tutorial.
Installed extraction
At the tool connection, D1R requires at least 230 mbar and 36 L/s. The 35 mm nominal recommendation and 19 mm physical adapter connection are different specifications; no free-air headline substitution.
Adapter qualification
With the battery removed, the intended screw secures adapter 29. The adapter may only remain fitted with external extraction connected, and no dust bag may attach. Adapter and hose precede guide installation.
Depth and bevel
Remove the battery before settings. Depth wing bolt 17 uses side reference 31 beside scale 18; set less than a full tooth. Secure bevel wing bolts 10 at zero using upper-holder reference 27.
Sighting and guide
Use the left edge of square mark 12 with waste to the right. Parallel-guide width reads at the outer base edge; verify the actual kerf on clamped scrap, not a factory offset assumption.
Grip and stop
Use the designated insulated handle without inventing an auxiliary grip. Lock-off then held trigger controls operation. The run-out brake has no promised stopping time; require actual stop and guard closure before setdown.
Check before you follow
Identity & documentation.
- Brand
- Bosch Professional
- Model
- GKS 12V-26
- Tool type
- Cordless circular saw
- Market
- UK 06016A1001 / type 3601FA1001, exact D1R owner scope
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Current D1R manual retained rather than older linked instructions. F10 declaration date is 19/01/2024. No variant accessory or carton equivalence, generic dust-bag authorization or charger procedure.
Keep the limits in view.
- Exact UK 06016A1001 / 3601FA1001 under D1R 19.02.2026, original qualified wood assembly and already commissioned genuine power and extraction system only. No blade fitting, charging, new rail commissioning, plunge, overload restart, kit promise or cross-brand battery equivalence.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- GKS 12V-26 qualified system
Check the exact original assembly, commissioned power and installed extraction before setting the compact saw for a supported square wood sample.
- A complete accessory budget
Build an owner-priced readiness ledger that separates verified reuse, missing prerequisites, optional items and unresolved compatibility without inventing prices.
- Reduced extraction assessment
Turn a loss of suction into a documented stop, isolated assessment and qualified return-or-hold decision for the exact D1R GKS 12V-26 system.