The MobileGlue 1007-S uses an integrated battery and compatible 7 mm adhesive. Arrange the small pieces before switching on, wait for the heating indication to finish and keep charging separate from active gluing.
Charging and heating are separate
Use the supplied charging cable and do not operate the tool while charging. Follow the specified charging-temperature range.
Feed gently after readiness
Use the genuine compatible stick and moderate feed pressure. A short advertised warm-up does not justify forcing the trigger before the adhesive is ready.
Automatic timeout is not cooldown
The tool can switch off after five minutes without trigger use. Finish with a deliberate shutdown and safe cooling; an automatic stop does not make the nozzle touch-safe.
Check before you follow
Identity & documentation.
- Brand
- STEINEL
- Model
- MobileGlue 1007-S
- Tool type
- Compact hot glue gun
- Market
- Germany
- Catalog number
- 084271
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- The nozzle and adhesive remain hot; a short warm-up claim does not justify forcing the feed.
- Charge only within the specified 0–35°C range with the supplied cable; do not use while charging.
- Alternating red and green indicates low remaining charge, not full charge; use the exact model's indicator instructions.
- Model-specific foam instructions are not permission to use any adhesive on any foam.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
STEINEL: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- MobileGlue pen or pistol?
Compare the MobileGlue 1007-S pen and 1007 pistol around reach, support and controlled placement rather than an invented bond-strength ranking.
- MobileGlue charging and pauses
Distinguish a five-minute pause shutdown from low battery or charging on the MobileGlue 1007 and 1007-S.
- Store glue tools between seasonal craft sessions
Cool fully, remove Gluey’s NiMH pair for prolonged storage, leave integrated batteries unopened and preserve each tool’s labeled consumables and charging equipment.