Retain the original hardware, seat all matching grooves and remove the key before a controlled loose-wood cut with full-stop withdrawal.
Document and original hardware identity
Match actual OS593001 and supplied 01/21 manual. Current support has no product-sale link. Separate2018 Version A sheet identifies original plain washer5650017009, socket screw5620340002 and key5680028002; not repair or revision-interchange authority.
Screw-with-washer blade change
OFF/full stop/front-release battery out; cool and glove. Loosen original screw with washer using supplied key, remove old blade and clean threads/shaft. Seat all grooves/ribs, hold blade with gloved hand, replace screw WITH washer and tighten using key. Verify secure seating and remove key before power.
Listed power and slide control
Actual BY519701 / SC535801 must already be commissioned under their own instructions. Slide forward ON/back OFF; dial1–6 with medium-high initial plunge range, no invented numbered recipe. Table11,000–16,000 oscillations/minute; no RPM conversion or automatic mode. Tool working−10–40 °C/storage0–40 °C are not charging limits.
Full-stop cut and isolated acceptance
Use actual soft-grip barrel/free hand clear, original recommended bi-metal wood blade, qualified dust/PPE and independently supported waste. Reach full selected speed before contact, stop completely BEFORE withdrawal, then remove battery for cooled both-face acceptance. Rapid LED indicates overload/heat; table trigger wording does not create a trigger or slow-flash state.
Check before you follow
Identity & documentation.
- Brand
- SKIL
- Model
- OS593001
- Tool type
- Cordless oscillating multi-tool
- Market
- United States; existing actual OS593001 / 01/21 supplied-document match
- Catalog number
- OS593001
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- No current sales, discontinuation or motor-technology inference from support listing. One actual body, not shared-filename kits.
- 20 V DC table and 20V MAX body wording retained without nominal conversion. BY519701 / SC535801 already commissioned under own complete instructions only.
- No guessed original blade SKU/rating, torque/key size/thread direction, adapter conversion, native hood, AutoSensing or trigger.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
SKIL: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- OS593001 original hex-clamp project
Use the matched dated manual, original screw-and-washer holder and listed existing power for a complete loose-wood cut.