An M18 body with a lever and threaded accessory bolt, a silhouette-specific adapter chart and manual dial positions 1–12.

Commissioned M18 power

Use only an already commissioned specifically designated M18 pack and approved charger under their complete actual instructions. A shared platform label is not a new pairing approval.

Lever and threaded bolt

With the battery removed, push the lever forward over its detent, invert on a flat surface, unscrew and clean; fit the verified native accessory and correct original bolt, hand-tighten securely, then close the lever.

Exact starred kit boundary

The manual has four no-adapter and five starred adapter profiles. Starred routes require the kit installation guard and accessory bolt; hold without exact kit identity and instructions.

Manual dial and slide switch

Positions 1–12 span 11,000–18,000 OPM at the stated endpoints. Slide forward I to run and back 0 to stop; there is no documented A mode. Wait for standstill and remove the battery before corrections.

Check before you follow

Identity & documentation.

Brand
Milwaukee
Model
2626-20
Tool type
Cordless oscillating multi-tool
Market
United States
Catalog number
2626-20
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Documentation-based, not hands-on testing; one body, not separate kit counts.
  • Starred adapter routes require exact kit guard and bolt; no invented kit identity, interchangeability or new charging procedure.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Milwaukee: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • 2626 versus 2836 inventory

    Separate the 2626 starred guard-and-bolt kit requirement from the 2836 two-profile adapter rule, then qualify one complete native wood-cutting system.