An existing US 10.8 V DC / 12 V Max body with a wrench-tightened accessory bolt, five-position dial and exact stop-before-withdrawal instruction.
Native hex-bolt mounting
With OFF selected and battery removed, fully engage the original blade holes on the flange protrusions and firmly tighten the installation bolt with the hex wrench. Remove and store the wrench before power.
Commissioned CXT power only
The tool table lists genuine BL1016, BL1021B and BL1041B. Use only the actual already commissioned approved system with its component instructions; the historical flyer is not a charging tutorial.
Cutting 3–5 without endpoint shortcuts
Move the 1–5 dial through intermediate numbers. The cutting recommendation is 3–5, not a per-setting OPM conversion. Switch OFF and wait for complete blade stop before withdrawal.
Separate sanding extraction
With OFF selected, full stop reached and battery removed, the optional joint, nozzle and attachment precede band engagement, felt ring, pad and installation bolt. This does not authorize saw-blade capture; do not use the extraction attachment when sanding metal.
Check before you follow
Identity & documentation.
- Brand
- Makita
- Model
- MT01
- Tool type
- Cordless oscillating multi-tool
- Market
- United States / discontinued MT01R1 product bridge / exact existing MT01 owner
- Catalog number
- MT01
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- Discontinued configuration; no current kit, charging tutorial, replacement-blade or other Makita mounting equivalence.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Makita: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- MT01 hex-bolt owner
Match the discontinued US MT01, identify its original wood blade and commissioned power system, tighten the accessory bolt with the hex wrench and stop before withdrawal.