A Canadian existing-owner route using the exact Q5-linked 2015 document, removable shaft and separately locked guide sleeve. The original MD28PB blade and qualified existing power system remain mandatory.

Exact document and power

Match the actual CV18DBL body and C99712063 G instructions. Use only the already commissioned original BSL1850/UC18YFSL system under complete actual instructions, not the broader current product power list.

Sleeve before lever

With OFF, full stop and battery removed, raise the lever parallel, pull and turn the sleeve to open-lock alignment, remove the shaft and old accessory, seat the original blade on the ring, insert the shaft, align closed-lock and only then lower the lever.

Standard versus conditional AUTO

Standard 1–5 spans 6,000–20,000 oscillations per minute. AUTO nominally uses 15,000 without load and 20,000 with load, but may not attain or return to those values for a particular task or attachment.

Housing grip and separate signals

The exact figure uses one hand firmly on the housing, away from metal. I starts tool and LED; O stops it. The separate held-button two-lamp indication is approximate remaining charge, not a health or fault diagnosis.

Check before you follow

Identity & documentation.

Brand
Metabo HPT
Model
CV18DBL
Tool type
Cordless oscillating multi-tool
Market
Canada; actual 2015 C99712063 G document and body match
Catalog number
CV18DBL
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • No assertion that the older Hitachi document governs every later Metabo HPT body.
  • No new kit, generic battery platform, universal fit, angle reconciliation or charging instruction.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Metabo HPT: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • CV18DBL sleeve and AUTO

    Use the exact Q5-linked 2015 instructions to complete an isolated original-blade installation, deliberate standard-mode sample cut and battery-out acceptance.