An exact 120 V existing-owner sanding route with original FEIN clip-in plate and complete native dust extraction, not a cordless or mixed-parts system.
Exact corded supply
Match the actual 120 V, 60 Hz USA/CAN body and May 2018 manual. Inspect cord and switch while unplugged; qualify the actual outlet and extension and retain the recommended 30 mA-or-less GFCI protection.
Closed jaws before insertion
With OFF, complete stop and plug removed, cool and remove the old accessory. If jaws are open, pivot the lever forward then back to close them; clip in the correct original plate and check straight secure seating without power.
Small plate is not every sanding plate
The selected small triangular plate uses levels 4–6. Round and large triangular plates are limited to level 4; profile sanding is medium. Keep the complete face moving with moderate pressure, not only the tip.
Native extraction and safe care
Unplug the tool and isolate the extractor before assembling the exact original collar, tube, rear retainer, front ring, plate and sheet sequence. Confirm actual wood-dust equipment instructions before use; internal or cable repair belongs to qualified FEIN service.
Check before you follow
Identity & documentation.
- Brand
- FEIN
- Model
- FMM350QSL
- Tool type
- Corded oscillating multi-tool
- Market
- United States; exact USA/CAN 72295209360 and May 2018 document
- Catalog number
- 72295209360
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Unavailable ETK row; no current stock, kit inventory or warranty promise.
- Original positively identified FEIN small plate, wood sheet and matching extraction required; no arbitrary ring, adapter or part-number inference.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
FEIN: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- FMM350QSL corded sanding
Use the exact May 2018 owner system, original small triangular plate and qualified native extraction to finish and inspect a clamped loose-wood surface.
- Multi-tool or sander?
Choose by supported contact shape, complete grip and dust-system access, and actual accessory evidence—not speed numbers or an assumed finish ranking.