Exact E64 corded owner workflow with press-to-engage Starlock/Plus retention, auxiliary handle, automatic light and separately qualified sanding extraction.

AutoClic ejection and engagement

Select 0, wait and unplug. Cool the accessory and wear change gloves. Open the lever fully to eject safely; press onto the correctly oriented accessory until audible engagement, then verify secure retention.

Starlock and StarlockPlus, not Max

E64 accepts Starlock and StarlockPlus and rejects StarlockMax. This project selects the actual identified AIZ 32 EPC for clean solid softwood; the segment stop is not its depth limiter.

Reachable slide and automatic light

Fit the intact auxiliary handle, keep both hands on insulated grips and the switch reachable. Forward I runs, rearward 0 stops; the 180-degree light follows the switch. Do not look into the LEDs or infer restart protection.

Separate installed sanding system

Unplug before fitting the sanding-only attachment. Dry sanding only: prevent overheating/fire and empty dust collection before breaks under the actual extractor instructions. Sanding requires both at least 220 mbar and 34 l/s at the tool connection plus actual extractor instructions; use no more than dial 4 and align pad/sheet holes.

Check before you follow

Identity & documentation.

Brand
Bosch
Model
PMF 350 CES
Tool type
Corded oscillating multi-tool
Market
France / order 0603102200 / exact E64 body
Catalog number
PMF 350 CES
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Keep the limits in view.

  • Documentation-based, not hands-on testing.
  • No transplanted bolt/washer/adapter procedure, StarlockMax, current kit guarantee or invented rate conversion.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

Bosch: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • PMF 350 CES AutoClic system

    Match the French E64 body, eject and audibly engage the correct wood blade, complete a clamped loose-stock cut and keep sanding pending until its actual extraction system qualifies.

  • PMF segment-stop sample

    Match the exact 85 mm segment blade and four-position stop, fully reseat the selected setting and inspect a shallow sample without treating its nominal depth as a hidden-service guarantee.