Corded Starlock-only body with MagnetHold positioning and a hex-key bolt, plus distinct E62 accessory-speed and dust-system requirements.
Magnet and original bolt
Unplug, position with depressed centre down and full cam engagement, then mechanically tighten the original clamping bolt using the hex key; magnet alone is not retention.
Starlock-only interface
The exact E62 chart accepts Starlock and rejects StarlockPlus and StarlockMax; twelve mounting positions are spaced 30 degrees apart.
Accessory-specific speed ceilings
Wood sawing has a recommended maximum 6; sanding, plastic/metal and RIFF have maximum 4, subject to any lower accessory limit.
Qualified sanding extraction
Dedicated extraction is sanding-plate-only and mandatory for sanding; both 220 mbar vacuum and 34 l/s flow are required at the tool connection.
Check before you follow
Identity & documentation.
- Brand
- Bosch
- Model
- PMF 220 CE
- Tool type
- Corded oscillating multi-tool
- Market
- United Kingdom / set 0603102071
- Catalog number
- PMF 220 CE
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Keep the limits in view.
- Documentation-based, not hands-on testing.
- Sanding qualification is separate from the completed wood cut.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
Bosch: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- PMF 220 CE MagnetHold and bolt
Complete the Starlock-only bolt mount and a qualified wood sample, keeping E62 speed ceilings and sanding-only extraction distinct.
- Sanding-pad system maintenance
Restore the exact PMF 220 CE or XMT03 pad, fastening, abrasive and dust assembly without repairing rejected consumables or borrowing parts.