A 140 mm wood-cutting body with a 10 mm arbor, push lock-off, single depth lever and a documented BY519801 4 Ah / QC535701 charging pair; CR541802 is the associated product offer, not another saw.
No current carton contents or stock promise.
Original approved installed blade only; alternative-size table text and related blade cards do not broaden fit.
Blade and controls
Original 140 mm / 10 mm wood blade rated at least 4,200 rpm; push lock-off before trigger. Remove the pack for settings and keep less than a full tooth below the stock.
Actual charging pair
BY519801 is 4 Ah; QC535701 accepts it and requires 120 V, 60 Hz AC. Normal charging is 4–40°C, with first-use full charge.
Charger states
Normal-charge green flashes while charging and stays green when complete. Steady red hot/cold requires removing the battery; persistent fault needs authorized diagnosis.
Sighting and extraction
The left 0° notch and right 45° notch are approximate references requiring a sample. The 1-1/4 in vacuum extension must be connected without obstructing lower-guard or cutting travel.
Check before you follow
Identity & documentation.
- Brand
- SKIL
- Model
- CR541801
- Tool type
- Cordless circular saw
- Market
- US CR541801 body; CR541802 product/manual bridge, actual owner labels required
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Tool 03/19; separately linked battery 12/18 and charger 07/19, freshly read rather than assumed identical to ZIP copies.
Keep the limits in view.
- No carton guarantee, alternate-bore or related-product blade substitution, partial blade-change procedure, 2 Ah charging-time claim on 4 Ah, internal plunge, rail compatibility or fixed brake time.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
SKIL: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- CR541801 12 V owner system
A complete original-assembly owner workflow for the CR541801 with actual BY519801 4 Ah battery and QC535701 charger: normal charging, controls, extraction and sample acceptance.