Establish the original round-arbor assembly, actual supply and dust conditions, then qualify the rear lever, front wing nut, right notch and complete supported cut.

Original combination wood assembly

7¼-inch / 5⁄8-inch ROUND blade rated at least 5300 RPM, existing correct washers/stud/Vari-Torque qualification. No fitting, clutch adjustment or deliberate slip test.

Actual supply and environment

Actual nameplate AC supply, sound matching cord/plug and complete extension qualification. No wiring, fuse/reset recipe or borrowed model amperage.

Depth lever and square check

Unplugged lever between guard and handle locks actual less-than-full-tooth depth. Source maximum-depth square check must be safe; restore sample depth afterward, no tab bending.

Front wing nut and right notch

Unplugged front bevel wing nut locks zero. Right side of notch is square-cut reference, qualified by actual scrap with good face down; no 51° operating permission.

Safety release and wrench storage

Either-side safety release then held trigger/full speed. Correct Figure 7 wrench orientation and second detent, adjusting tools removed; no 5180/5185 light assumption.

Dust and complete stop

Blower only clears sightline, no native extraction port established. Actual dust controls must qualify or HOLD; normal full cut then release/actual stop/guard/unplug, immediate interruption stop overrides.

Check before you follow

Identity & documentation.

Brand
SKIL
Model
5080
Tool type
Corded circular saw
Market
US 5080-01 physical/nameplate/supplied 04/19 match
Catalog number
5080-01
Evidence level
Manufacturer documentation; no physical testing

A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.

Product/table 51° versus operating 45° remains unresolved; all bevel cutting excluded. Vari-Torque is not a brake. Blower is not extraction, and the 5180/5185 indicator is not a 5080 feature. No current accessory-card substitution or kit claim.

Keep the limits in view.

  • Exact US 5080-01 / supplied 04/19 model 5080 instructions only, not 5180/5185 indicator or separate kit. Original qualified round-arbor combination wood blade at least 5300 RPM and correct Vari-Torque assembly, actual supply and task-specific dust qualification. Square edge-entry only; no fitting, clutch adjustment/testing, brake claim, 51-degree synthesis, bevel, tab calibration, plunge, nonwood, wiring, internal care or invented extraction port.

Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.

SKIL: explore this brand’s tool references

Guides for this model

Explore controls, comparisons and documentation for this exact model.

  • 5080-01 original wood owner

    Check the original clutch/blade system, rear depth lever, front wing nut, right notch and actual dust conditions before a complete supported sample.