Qualify original assembly, documented existing power and complete native extraction before one supported square sample.
Original assembly only
Positively identified original recommended 670973055 wood blade 140 mm×1.5 mm and correct original hardware already qualified. Printed 3/8-inch (10 mm) is not interchangeable-bore permission; no invented blade RPM rule.
Existing documented power
Actual designated battery/charger already commissioned under 987000-432 and complete component instructions. No newly read supplement, named pairing, charging or broad ONE+ approval claim.
Shared knob retention
Battery removed for setup: rear depth KNOB and original washer also participate in complete native adapter retention. Recheck retention after depth adjustment; no partial adapter installation.
Actual depth and zero
Less than a full tooth AND no more than 1/4 inch below stock, with breakthrough/support clearance; quarter inch is not a target. Separate front bevel KNOB locks zero.
Original extraction gate
Already qualified 543072001 native system, actual compatible hose and effective active extractor. A065501 current compatibility does not prove exact part equivalence.
Two hands and actual stop
Main handle plus front motor-housing grip, outer zero notch, either-side lock-off then held trigger/full speed. Actual full stop before withdrawal, guard coverage and battery removal before acceptance.
Check before you follow
Identity & documentation.
- Brand
- RYOBI
- Model
- PCL500
- Tool type
- Cordless circular saw
- Market
- US PCL500 / current-returned 998000539 REV07
- Catalog number
- PCL500B
- Evidence level
- Manufacturer documentation; no physical testing
A source check date records this research pass. It does not confirm that a manual is the newest possible revision, a tool is still in production, or a particular unit matches these documents.
Retain literal bore pair, motor-versus-blade-rating distinction, manual/retail part non-equivalence and API kit-field ambiguity. One body, no package alias.
Keep the limits in view.
- Actual US PCL500 / 998000539 REV07 match. Original positively qualified 670973055 wood assembly; printed 3/8-inch (10 mm) is not substitution permission and 4700/min motor speed is not a new accessory rating rule. Existing exact power qualified under 987000-432 and component instructions; those documents not newly read. Complete already qualified native 543072001 extraction; no A065501/A065101 equivalence. No fitting, charging, new pairing, rail, bevel, pocket, repair or restart procedure.
Read the instructions for the tool and any applicable battery or charger together. Routine owner care stays outside the housing; internal service belongs with the manufacturer or an authorized service provider.
Keep reading
RYOBI: explore this brand’s tool references
Guides for this model
Explore controls, comparisons and documentation for this exact model.
- PCL500 original-system owner
Check the actual REV07 tool, original wood assembly, commissioned power and complete native extraction before a supported square sample.